DR_Knight

iTrader: (23)

Been searching and looking at wiring diagrams but need.more insight mating a s4 NA auto front harness to a manual starting/charging harness. The problem im having is bypassing the inhibitor switch without having the connector on the starting harness since the auto connector is 3 wire while manual is 4 wire

Situation is that i purchased a front/dash harness on the forums that was 5 speed. But seller was mistaken after i looked at the wiring diagram and seeing what didnt connect

satch

iTrader: (1)

Jumpering B/W to B/R bypasses the switch.

DR_Knight

iTrader: (23)

Thank you. Will try right now