Help Installing Intake
07-28-04, 11:58 PM
#1
Senior Member
Thread Starter
Join Date: Jul 2004
Location: California
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Help Installing Intake
I recently just bought a HKS intake kit, I was wondering if its really as easy as it sounds to install it. ALl i know is you remove the stock air box and install the intake...is there any detailed information you guys can give me? anythingy important i need to know? anything i shoulnt touch? thanks everyone!!!
07-29-04, 12:25 AM
#3
Full Member
Join Date: Jan 2004
Location: Calgary, Alberta, Canada
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Well, there are a few minor things to think about...
Such as, do you have an adapter plate between your MAF and your intake filter? cause you need one.
Another thing, is to keep the maf in the same position as it is stock (dont flip it, turn it.. etc)
thats all you really need to know, ohh... and that if its on a turbo car your boost will go up a little
Such as, do you have an adapter plate between your MAF and your intake filter? cause you need one.
Another thing, is to keep the maf in the same position as it is stock (dont flip it, turn it.. etc)
thats all you really need to know, ohh... and that if its on a turbo car your boost will go up a little
07-29-04, 01:15 AM
#5
Rotary Enthusiast
Join Date: Jun 2003
Location: Millville, NJ
Posts: 1,424
Likes: 0
Received 0 Likes
on
0 Posts
If your Intake didn't come with one, search on Ebay, or search for AFM adapter and RX7 on the internet. If you have any speed shops in town, they can probably get you one iwthin a day or two..
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM