help with idle cam assembly
#1
Full Member
Thread Starter
Join Date: Jan 2002
Location: NB, Canada
Posts: 219
Likes: 0
Received 0 Likes
on
0 Posts
help with idle cam assembly
Hey guys, I did the TB mod yesterday and it all went reasonably well for a first timer. My problem now is on reasembling everything, I don't know how to get the idle cam back on properly.
On closer inspection of Ted's writeup, I found out I was never supposed to remove these. Don't ask me why I did, it just seemed logical at the time. Anyway I think I have **** on in the write order (there are a lot of parts) but I don't know about the proper rotation and how the 2 small springs in the assembly hook up. I have a similar proplem on the other side of the TB.
For those that don't know what I'm talking about, it is the assembly that the throttle cable attaches to on both sides of the TB, the parts that bolt onto each end of the primary throttle plate shaft.
What I could really use is some detailed photos of the TB with all of these intact, from angles that show each piece and how it attaches. If anyone has a digital camera and could do this for me I would be sooo greatful. I have ot get this thing back together today. I'm rather urgent.
Thanks,
Blake
On closer inspection of Ted's writeup, I found out I was never supposed to remove these. Don't ask me why I did, it just seemed logical at the time. Anyway I think I have **** on in the write order (there are a lot of parts) but I don't know about the proper rotation and how the 2 small springs in the assembly hook up. I have a similar proplem on the other side of the TB.
For those that don't know what I'm talking about, it is the assembly that the throttle cable attaches to on both sides of the TB, the parts that bolt onto each end of the primary throttle plate shaft.
What I could really use is some detailed photos of the TB with all of these intact, from angles that show each piece and how it attaches. If anyone has a digital camera and could do this for me I would be sooo greatful. I have ot get this thing back together today. I'm rather urgent.
Thanks,
Blake
Thread
Thread Starter
Forum
Replies
Last Post
toplessFC3Sman
2nd Generation Specific (1986-1992)
6
03-20-18 01:54 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
09-10-15 01:33 PM