In my car there is a long pin block electrical connector by the left tail light that maybe went to a factory amp or something much weirder?

It looks like a molex computer power supply to motherboard connector. It's large. The only thing I could think is maybe factory amp?

Is it possible to find one of these amps if thats the case?

 

Without pics hard to say for sure, but maybe AAS?

 

I would also like see a picture of what you are describing. The only thing that I can think of back there with that type of connector would be the AAS control unit. Whether your car has the AAS or not, it was prewired with the harness. If you didn't have it the connector was just there, not plugged into anything.

 

It has the front electronic controls on the shocks, and has the normal/sport buttons in the center console.. It's an 86 gxl

If I have the front electronic modules does it also have the rear? This car has been messed with so it's entirely possible the module is missing.


Just found the aas module online it's definitely what's missing. Thanks guys! It is a weird connector.

 

I've seen people remove them thinking that the module has gone bad. Its commonly a failed actuator on the top of the strut. Glad you were able to figure out what was missing! Are the actuators still present on the rear shocks?

 

I believe they are, they are under the speakers so I didn't see them, the fronts are still there. I ordered the module so maybe I'll slap it in and see if it works.

What are shock rebuild options or swaps that are compatible with the electronic controller?
​​​
Koni makes adjustable shocks, which I'm considering getting for the rears I wonder if the control top part is compatible.. Neat.

Also to add some how the factory sturts don't feel blown on this car even being 30 years old suspension still feels decent

 

This sucks the plug on my aas system is longer than the plug on the aas module from later rx7s

I ordered an aas module and my plug is 4 pins longer

 

I have a module out of an 87 gxl
If you need.

 

I ordered one that is similar pin but not same as mine, notice center pin and then 3 and 2

So center pin then 5 pins on each side hmm

This has the same connector
https://www.ebay.com/itm/Engine-ECM-Electronic-Control-Module-Fits-81-82-MAZDA-RX7-166716/273878715811?fits=Model%3ARX-7%7CMake%3AMazda&hash=item3fc4718da3:gK8AAOSwLD1 c-7ai

 

It looks like your connector matches my module

 

It do's. What you want for that hog? I have been looking at modules all day and can't seem to find one with same connector, I ordered one and it's likely off of an s5 and the connector is for sure different.

I have a power steering control module on the way, spare and an s5 aas controller if anyone needs those lol.

 

Update: the module arrived from the post.

I have installed it earlier tonight and had my buddy feel the actuators and they are clicking and doing stuff so that's neat.

 

Glad to hear it seems to be working!