Help!!!! Egr Solenoid Valve Help!
10-27-06, 06:00 PM
#1
Senior Member
Thread Starter
Join Date: Nov 2005
Location: Austin,TX
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Help!!!! Egr Solenoid Valve Help!
Ok i have an N/A 86 Rx-7, well my pulsation dampner went out so i opted to do the banjo bolt install. I got my injectors cleaned and replaced my OMP lines and all my vacuum lines, well in the process i broke the plastic nipple on the EGR soleniod valve, and I thought no biggie, welll when i started up my car it sounded like it wanted to die, also when i would slightly rev it would backfire like crazy! I tried driving it and it was so slow!!!! Is there any way to bypass the EGR? what can I do other than buying a soleniod valve?
car sounds so weird and revs so slow! I finaly super glued the nipple back onto the valve and still the same plroblem! Help!
10-28-06, 11:59 AM
#3
HAILERS
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
It ain't the EGR valve/solenoid. It's something else that YOU did. Maybe sparkplugs on backwards, fuel injector plugs backwards etc. Ain't the EGR solenoid. To prove that just plug the EGR vacuum lines to and from the EGR solenoid. Tain't the EGR solenoid.
10-28-06, 02:23 PM
#5
Senior Member
Thread Starter
Join Date: Nov 2005
Location: Austin,TX
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
Well I took off the UIM and checked everything out, looks great. Put everything back and now the car wont start!! WTF i have been trying to start and nothing.
Thread
Thread Starter
Forum
Replies
Last Post
Turblown
Vendor Classifieds
12
10-17-20 03:25 PM
