HELP!!! computer/ wiring question
03-25-03, 12:17 PM
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: shreveport, LA
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
HELP!!! computer/ wiring question
I need some input. I have a lot of experience with RX-7s but almost all is with 1st generation cars. I have a 88 vert with the N338 computer and a good engine. Suffered an engine fire. I stripped the top of the engine down and discovered that the primary injectors are toasted as well as the harness and misc hoses and sensors. Good news is that I have a complete running 86 GXL with a blown rear apex.
I understand that there are differences in the injectors/ harnesses/and computers.
So here goes:
If I take the harness and injectors as a setup from the 86 and transfer them to the 88, will it run correctly? Which computer should I use?
Is it true that it is the harness and injectors that are matched and that either computer will work as long as the harness and injectors remain fom the same car?
I understand that there are differences in the injectors/ harnesses/and computers.
So here goes:
If I take the harness and injectors as a setup from the 86 and transfer them to the 88, will it run correctly? Which computer should I use?
Is it true that it is the harness and injectors that are matched and that either computer will work as long as the harness and injectors remain fom the same car?
03-25-03, 12:34 PM
#2
Former Moderator. RIP Icemark.
Re: HELP!!! computer/ wiring question
Originally posted by nosferatu595
I understand that there are differences in the injectors/ harnesses/and computers.
So here goes:
If I take the harness and injectors as a setup from the 86 and transfer them to the 88, will it run correctly? Which computer should I use?
Is it true that it is the harness and injectors that are matched and that either computer will work as long as the harness and injectors remain fom the same car?
I understand that there are differences in the injectors/ harnesses/and computers.
So here goes:
If I take the harness and injectors as a setup from the 86 and transfer them to the 88, will it run correctly? Which computer should I use?
Is it true that it is the harness and injectors that are matched and that either computer will work as long as the harness and injectors remain fom the same car?
Thread
Thread Starter
Forum
Replies
Last Post
The Shaolin
2nd Generation Specific (1986-1992)
9
09-14-15 07:50 PM