Ok, got my clutch bleed. Pedal feels fine, but my clutch won't disengage. I'll put it in first gear, hold the clutch, and try to start my car and it jumps. The transmission seems to be fine. Could my clutch be stuck to the flywheel?

 

Make certain there is only minimal freeplay when the pedal is up, then watch the clutch fork for movement when pedal is pressed down as to disengage the disc.

A seized pilot bearing will cause a similar problem as the main shaft keeps turning when the clutch is disengaged.

 

Everything looks fine, still nothing

 

nevermind i got it working. i put the rear of the car on a jack, stuck it in second, and pulled the e-brake and presto!!!