Yeah! Im almost done with my RE swap. Recived nice SSlines from banzai yesterday but now i cant find the oil output on the 13bRE engine.
hahah there is an output for oil or water on the RH side of the engine, but this cant be the output!?

Sindre

 

There are two of them.
One should be on the front cover.
The rear one (remember, stock it had two turbos) is a hole on the rear iron down low.


-Ted

 

hmm so i found out that the RE engine has in the frontcover and on the oil pedestal. Can i just block of the water holes and the one hole on the rear iron with plugs and block off plates?

 

What are you trying to do?

 

The oil feed to the turbo is on the top left side of the front plate. The oil output to the oil cooler is on the front cover. left side.
The oil return for the turbo goes to the front cover, right side. Just use a split air pipe block off plate for the rear plate oil return line. The oil return for the oil cooler is at the oil filter pedestal.

The smallest (-4an) diameter line is the turbo oil feed line, the brass restrictor goes in the turbo, the blue adapter goes in the block with the provided sealing washer.

 

Doh, he's talking about oil cooler lines.

Yeah, the rear oil cooler line is like FD where it goes into the oil filter pedestal.
You need custom lines or ones made for this application.
I don't know of anyone offered this "kit" for FC.


-Ted

 

I can sell you a set, pm me if your interested.

 

Thanks BlueTII

RETed, i bought the hole oil lines/hose kit from Banzai Racing.

Sindre

 

We have custom FC oil cooler line kits for 13b-re and 13b-rew installs on our website.