Help!
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally Posted by Saten
Ok got the car back up and running this morning there was a loose wire... Still no interior lights.... One last question for you guys... Why does the car stumble if you give it more then half throttle?????
Why won't you pull the engine codes??? Any stumbling will show up as a error code
Thread Starter
Senior Member
Joined: Oct 2004
Posts: 426
Likes: 1
From: Stephenville, Tx
To check the code i need to ground the green wire in the front of the car??? Just making sure of that... Give me a few minutes to check the codes... Sorry for any confusion. I am still really new to these motors and dont know much about them so when i get stumped i get really frustrated..
Thread Starter
Senior Member
Joined: Oct 2004
Posts: 426
Likes: 1
From: Stephenville, Tx
Ok I just checked the codes and it blinked four times???
which would be this???
40~ auxiliary port valve
But what does that mean?
which would be this???
40~ auxiliary port valve
But what does that mean?
Last edited by Saten; Nov 6, 2004 at 08:18 PM.
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
I don't want to buy a shop manual for my car, is there a place where I can still find out the information from one?
Shop manuals for both series can be found on-line at:
http://www.cochran-racing.com/FSM/index.html
http://slackerware.dynu.com/fsm/
http://208.62.166.66:82/guest/shop_manuals/
or (86-88)
http://www.teamfc3s.org/main/factor...nual/1986_1988/
and (89-91)
http://www.teamfc3s.org/main/factor...nual/1989_1991/
Shop manuals for both series can be found on-line at:
http://www.cochran-racing.com/FSM/index.html
http://slackerware.dynu.com/fsm/
http://208.62.166.66:82/guest/shop_manuals/
or (86-88)
http://www.teamfc3s.org/main/factor...nual/1986_1988/
and (89-91)
http://www.teamfc3s.org/main/factor...nual/1989_1991/
Senior Member
Joined: Mar 2004
Posts: 350
Likes: 0
From: Victoria, BC
2 of Icemarks links work fine and contain manuals and troubleshooting info (and more importantly he is showing you that all the info you need can be found with a search or checking the FAQ's at top of page)
You have been vague about your problems and when offered info you almost ignore it.
We cannot check the things necessary for you. Especially with the vague descriptions. You have to do the testing necessary and if then stumped we can help you with the proper diagnostic info.
On this forum is every answer to dam near every problem with your car, you just simply have to look or do the basics and report your findings if you want more direct help.
Your not off to a very good start
You have been vague about your problems and when offered info you almost ignore it.
We cannot check the things necessary for you. Especially with the vague descriptions. You have to do the testing necessary and if then stumped we can help you with the proper diagnostic info.
On this forum is every answer to dam near every problem with your car, you just simply have to look or do the basics and report your findings if you want more direct help.
Your not off to a very good start
Last edited by Tiers; Nov 8, 2004 at 10:57 AM.
