Heater issues
01-31-09, 04:20 PM
#1
HAILERS
Thread Starter
Join Date: May 2001
Location: FORT WORTH, TEXAS,USA
Posts: 20,563
Likes: 0
Received 21 Likes
on
19 Posts
Heater issues
If someone has heater/fan issues, and has batt voltage at the green/black wire at each of the relays on the heater housing (key ON), then your problem might be the resistor wire is broken in two or burnt up.
The resistor is found on the bottom of the fan housing. Held with two phillips screws and is oval in shape. Pull it out and you should find a spring like the one in the attached jpg. If one or the other end of that spring is broken, then solder it back in place.
The resistor is found on the bottom of the fan housing. Held with two phillips screws and is oval in shape. Pull it out and you should find a spring like the one in the attached jpg. If one or the other end of that spring is broken, then solder it back in place.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM
risingsunroof82
1st Generation Specific (1979-1985)
8
09-07-15 01:11 PM