Headlight Washers as alc./H20 injection
06-24-03, 06:17 PM
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: Charleston, SC
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Headlight Washers as alc./H20 injection
I was wondering if anyone had ever tried using the pump and resevoir that's for the headlight washers as the basis for an alcohol/water injection system. All I'm really wondering is if the pump would be adequate. It could be a real "sleeper mod" already having the switch and all. Just get a small mister nozzel and put it somewhere in the I/C piping tract.
~Travis
~Travis
06-24-03, 06:32 PM
#2
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Alcohol/water injection systems require high pressure and a finely atomised spray. Th e headlight washer pump would be totally inadequate. You need to use high quality nozzles too, not cheap garden sprayers.
06-24-03, 08:18 PM
#4
I'm a boost creep...
Join Date: Jan 2002
Location: Auckland, New Zealand
Posts: 15,608
Likes: 0
Received 8 Likes
on
8 Posts
Scott, you should still get better nozzles. You need a fine spray, not a solid squirt.
Just curious, do you have any pix if the headlight washer nozzles on the car? I've never seem them.
Just curious, do you have any pix if the headlight washer nozzles on the car? I've never seem them.
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
10-07-15 04:04 PM