2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

headed to the dyno today

Thread Tools
 
Search this Thread
 
Old 10-24-03, 11:12 AM
  #1  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (61)
 
87GTR's Avatar
 
Join Date: Aug 2001
Location: Nago Okinawa
Posts: 3,103
Likes: 0
Received 1 Like on 1 Post
headed to the dyno today

Well last time we busted off 476rwhp and 383torq
we are going to clean it up a little more and bring the boost up a few more pounds to break 500rwhp.

we where getting some unstable boost. tyring to hold 20 - 23 psi on 5LBS hks waste gate spring. now we have the 14 pound spring installed and the boost is more sold. we also tieghted up the bov a little more.


then after the dyno going to Ennis for Ultimate Street car challange. looking to make a full 1/4 mile run and see what we can twist out of this car.


a few days ago we change the tranny and rear diff fuild to royal purple. so far im not impressed with it it seams harder to get into gear now. I think we might go to red line to bring back the smothness.
Old 10-24-03, 11:16 AM
  #2  
The "Original SDRotary"

 
SDrotary's Avatar
 
Join Date: Apr 2003
Location: San Diego
Posts: 428
Likes: 0
Received 0 Likes on 0 Posts
Good luck , yea i think my tranny felt better when i had the redline in as apposed to the royal purple.
Old 10-24-03, 12:50 PM
  #3  
Full Member

 
fasthack's Avatar
 
Join Date: Dec 2001
Location: Coloradp Springs...New Orleans,WI
Posts: 146
Likes: 0
Received 0 Likes on 0 Posts
niice, its good to see that you finally got that other turbo on and fixed that stud that came out of the block at hassans shop a few weeks ago. Those numbers you got are awesome and i can't wait to see you walk all over 500 rwhp. Next time you are out in new orleans you'll have to let me know so i can stop by and see your car tuned up! Good luck today Tony

Craig
Old 10-24-03, 12:53 PM
  #4  
Rotary Enthusiast

 
ponykiller's Avatar
 
Join Date: Aug 2001
Location: KC
Posts: 819
Likes: 0
Received 0 Likes on 0 Posts
Best of luck to you, hope everything goes smoothly.
Old 10-24-03, 01:22 PM
  #5  
Despise Enmity

 
Josepi's Avatar
 
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes on 0 Posts
Old 10-25-03, 12:02 PM
  #6  
Eats, Sleeps, Dreams Rotary

Thread Starter
iTrader: (61)
 
87GTR's Avatar
 
Join Date: Aug 2001
Location: Nago Okinawa
Posts: 3,103
Likes: 0
Received 1 Like on 1 Post
after changing out the 5psi for 14psi spring and making a run on just the spring we did 383rwhp @ 14psi.

after turning on the boost controller and justing the gain and dutycycle we got 404rwhp @ 15psi.


next we started working the boost up on the high boost setting. we did 490rwhp @ 23 psi with 404torq. our last best was 476rwhp 380 torq @ 23psi

im still not happy with the royal purple feel and will be changing it out next week

We are also going to changing the fuel system a little. running two pumps!!
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eddierotary
Engine Management Forum
16
10-04-16 08:22 PM
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM



Quick Reply: headed to the dyno today



All times are GMT -5. The time now is 09:45 AM.