I have my car with a open hood outside and trying to get help ryt now.....I got one of my spark plugs out and it was like .....BURNT...so im thinking the rest are too...
Im having trouble taking out tha Left Spark plugs and the Righ bottoms one...theres like....no room what so ever....my ratchet cant even fit in there....what should i do???

 

Unless you're using something unwieldy like a 1/2" drive ratchet, you should be able to get a 3/8" drive in there OK. It's tight, but you ought to be able to at least get it to break loose. Got A/C and power steering pump in the way, right?

 

yeah...those are in the way!!! i can onli get the spark plug thingy in there...but the ratchet wont fit??? do i use my hand , grip it...and twist???

 

Yeh, you won't be able to "ratchet" it too far, so you have to position it so you can get at least an inch or two of "oomph" before you run out of room...If you want, get some of the easy stuff out of your way first, i.e. plug wires, then try to shove the A/C lines & such out of your way just a bit...

 

but its like.....hella hard...its hecka stiff ( the wires) .....i can move it like 2mm ...if i use brute force...it wont break will it( the AC Wires)

 

I dont see how you don't have the room for it. It might be a little difficult to torque it off. Try this, get the rachet on there and put a long pipe over the handle of the ratchet. Make sure the spark plug socket is completely on the spark plug before torquing it a little. Break it loose first and the ratchet it slowly. You can also try it from the bottom of the car, it may be easier for you. Also make sure you are turning it the right way... rightey tightey lefty loosey.