Has anyone heard of this outfit?
#1
What Subscription?
Thread Starter
Join Date: Apr 2001
Location: Aiken SC USA
Posts: 5,926
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone heard of this outfit?
http://www.rotarypowermarine.com/Rotary%20QA.htm
Q. Are RPMC engines new engines?
A. Yes. RPMC engines are entirely new engines. No rebuilt, remanufactured, or overhauled parts are used in our engines. All engine blocks are assembled in Japan, by Mazda Corporation. RPMC manufactures and/or assembles all other components at our Glen Cove, NY facility. Every engine is run-in on a Superflow dynamometer to ensure that all systems perform flawlessly before the engine leaves the factory.
How are they pulling this off?
Q. Are RPMC engines new engines?
A. Yes. RPMC engines are entirely new engines. No rebuilt, remanufactured, or overhauled parts are used in our engines. All engine blocks are assembled in Japan, by Mazda Corporation. RPMC manufactures and/or assembles all other components at our Glen Cove, NY facility. Every engine is run-in on a Superflow dynamometer to ensure that all systems perform flawlessly before the engine leaves the factory.
How are they pulling this off?
#5
Despise Enmity
Join Date: May 2001
Location: Richmond, VA
Posts: 2,420
Likes: 0
Received 0 Likes
on
0 Posts
Reply email:
Hello Joe:
Thank you for your interest in Rotary Power Marine Corporation products. For more information, please visit our "detailed" website at www.rotarypowermarine.com.
Our marine engines are based on 13B blocks built to our specifications by Mazda in Japan. They are all brand new engines, not rebuilds, remans, or take-outs. The configuration is not identical to any automotive block because there are a number of features that we require for marine applications. The specific configuration is assembled from all production parts, but some combinations were never offered together for any production automotive application.
We do not sell bare blocks, only fully-assembled marine engines. What application did you have in mind, perhaps we can provide a turn-key solution?
Sincerely,
Jonathan Lauter
Rotary Power Marine Corporation
516-656-5685
Hello Joe:
Thank you for your interest in Rotary Power Marine Corporation products. For more information, please visit our "detailed" website at www.rotarypowermarine.com.
Our marine engines are based on 13B blocks built to our specifications by Mazda in Japan. They are all brand new engines, not rebuilds, remans, or take-outs. The configuration is not identical to any automotive block because there are a number of features that we require for marine applications. The specific configuration is assembled from all production parts, but some combinations were never offered together for any production automotive application.
We do not sell bare blocks, only fully-assembled marine engines. What application did you have in mind, perhaps we can provide a turn-key solution?
Sincerely,
Jonathan Lauter
Rotary Power Marine Corporation
516-656-5685
Thread
Thread Starter
Forum
Replies
Last Post