has any1 had problems with their omp?
Joined: Jul 2002
Posts: 724
Likes: 0
From: 195 Miles West of Bridgeport, WA
yes, i had 2 different ones on 2 different engines that leaked a bunch, not because of the o-ring gasket that mates to the engine, but because of a little o-ring inside the omp.
Yes. I've had a number of them leak at the arm. There's a o'ring there and there's no part number in the parts fische. The o'ring can be replaced though using a aftermarket ring. Just gotta get out there and find one.
Bah, fine.
Before I took it off, mine leaked a bit. Also, the lines running to it were brittle and broke easily. I'd say those are the 2 most common problems.
S5's have problems with shorting (or something) and messing up the ECU. Or, going into limp mode.
Before I took it off, mine leaked a bit. Also, the lines running to it were brittle and broke easily. I'd say those are the 2 most common problems.
S5's have problems with shorting (or something) and messing up the ECU. Or, going into limp mode.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
BLK 93
3rd Generation Specific (1993-2002)
11
Sep 9, 2015 10:56 AM






