gxl to turbo pics fmic piping complete
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2002
Location: ct
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
gxl to turbo pics fmic piping complete
my project is comeing along im getting all the final fittings in then i have to pull the enginge to paint everthing all ineed know is a 3rd gen alt to juice it up if anyone knows who,s selling one please let me know thanks fellas
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 108 Likes
on
91 Posts
FOCUS!
Looks good. Finally someone did the right thing and went through the rad support instead of under the headlights. I did the same and it saved almost 5 feet of piping length.
One thing though...There's a LOT of rubber on those lines, and worm gear type hose clamps. I think you'll find issues with it blowing off.
Also, is the your battery properly retained with a circuit breaker/fuse mounted as physically close as it can be?
Looks good. Finally someone did the right thing and went through the rad support instead of under the headlights. I did the same and it saved almost 5 feet of piping length.
One thing though...There's a LOT of rubber on those lines, and worm gear type hose clamps. I think you'll find issues with it blowing off.
Also, is the your battery properly retained with a circuit breaker/fuse mounted as physically close as it can be?
#5
Rotary Enthusiast
Thread Starter
Join Date: Feb 2002
Location: ct
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
bnr turbo
that radiator is history ,as well as the hoses im started everthing in the cooling system all knew ill get pics of the rest of the car the interior with door pods ,i also put a snuber under the diff ill post more pics of my conversion any quetions are welcome i also have a bnr stage 2 turbo in there
Trending Topics
#10
Rotary Enthusiast
Thread Starter
Join Date: Feb 2002
Location: ct
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Thanks madracer I priced one for $140 at feiners in waterbury ct so what ill do is convert it over,I have a lot more pics comeing ,I must admit the bnr turbo stage 2 sends butterflies through your stomach it wants to move ,now I have my isuzu truck fmic ill be able to run safe I wired my walboro with a relay all knew injectors, I vowed to myself never to put 20year old injectors in my car again , I love rx7s and ill never give it up,ill just learn more and more and thanks for the help from all you members ,my pics will be posted next week
#11
Rotary Enthusiast
Thread Starter
Join Date: Feb 2002
Location: ct
Posts: 828
Likes: 0
Received 0 Likes
on
0 Posts
Thanks madracer I priced one for $140 at feiners in waterbury ct so what ill do is convert it over,I have a lot more pics comeing ,I must admit the bnr turbo stage 2 sends butterflies through your stomach it wants to move ,now I have my isuzu truck fmic ill be able to run safe I wired my walboro with a relay all knew injectors, I vowed to myself never to put 20year old injectors in my car again , I love rx7s and ill never give it up,ill just learn more and more and thanks for the help from all you members ,my pics will be posted next week
Thread
Thread Starter
Forum
Replies
Last Post