grounding/3800hesitation
Thread Starter
wet drifting dream
Joined: Sep 2003
Posts: 161
Likes: 0
From: Earth
grounding/3800hesitation
I have a 86fc n/a I did a grounding search on this site not much help...My question's are how do I tell if I have a 5port or 6port system,what color wire on my ecu do I ground,what wire on the map sensor "right strut tower" do I ground,How do you remove and clean your acm?
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
All N/A FCs have both 5th and 6th ports (called Auxiliary ports). They are 6 port motors.
The grounding thread can be found in the 2nd gen archive section. You will want to read that.
The grounding thread can be found in the 2nd gen archive section. You will want to read that.
You have a 6-port motor. All of the 2nd gen N/As are 6-ports.
Here is one thread I found.
https://www.rx7club.com/forum/showth...t=ECU+REGround
Here is one thread I found.
https://www.rx7club.com/forum/showth...t=ECU+REGround
Full Member
Joined: Aug 2003
Posts: 53
Likes: 0
From: Colorado Springs
check out www.fc3s.org
they have an online manual you can check out to help answer your questions as well
they have an online manual you can check out to help answer your questions as well
Former Moderator. RIP Icemark.
Joined: Apr 2001
Posts: 25,896
Likes: 24
From: Rohnert Park CA
Originally posted by J-Rat
Dang Ice, look at the post times.... Exactly the same.
Dang Ice, look at the post times.... Exactly the same.
You can give a man a fish...
Or you can make him catch it himself...
