Greddy profec e-01, emanage combo on the FC
#1
Full Member
Thread Starter
Join Date: Mar 2003
Location: Sweden
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Greddy profec e-01, emanage combo on the FC
Been looking into a fuel computer, boost controll, gauges setup and seems this combo is the way to go ...
I'm planing to use the e-01 display instead of gauges when i drive normaly (a/f, boost, and some).
I'll get a wideband lambda that can give the 0-1 and 0-5 reading and connect the 0-5 to the analog signal input so i can map on the wideband values and have the ecu get the normal feed from the 0-1 cable.
Is anyone here currently running it on there FC(t2) ?
Does a FC pass emissions with it ?
Can I actualy use the analog signal input to measure a brodband lambda and get that value on the same graf as the rest of the data (rew, boost)? or is there something that i will have to use that input to ?
also .. is it possible to connect more then one analog signal input ? would be cool to have ex.t temp and water temp, oil .. et.c in the same data sheet ...
/bo
I'm planing to use the e-01 display instead of gauges when i drive normaly (a/f, boost, and some).
I'll get a wideband lambda that can give the 0-1 and 0-5 reading and connect the 0-5 to the analog signal input so i can map on the wideband values and have the ecu get the normal feed from the 0-1 cable.
Is anyone here currently running it on there FC(t2) ?
Does a FC pass emissions with it ?
Can I actualy use the analog signal input to measure a brodband lambda and get that value on the same graf as the rest of the data (rew, boost)? or is there something that i will have to use that input to ?
also .. is it possible to connect more then one analog signal input ? would be cool to have ex.t temp and water temp, oil .. et.c in the same data sheet ...
/bo
Last edited by gugge; 02-17-04 at 09:01 AM.
#2
Full Member
Thread Starter
Join Date: Mar 2003
Location: Sweden
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
http://www.mohdparts.com/emanage/pho...hotos/opt2.JPG
it's 2 channels of extra stuff that can get connected
/bo, posting and researching the same time !
it's 2 channels of extra stuff that can get connected
/bo, posting and researching the same time !
#4
Dale Clark is the only person I know of that is running the e-manage on an FC. Yes the e-01 can be used in conjunction with the e-manage, as well as the greddy guages. You can find him over on teamfc3s.
Trending Topics
#8
Senior Member
Join Date: Jan 2003
Location: Tampa, Fl
Posts: 387
Likes: 0
Received 0 Likes
on
0 Posts
Yeah. I had to install the greddy map sensor too. It worked alot more effectively on my friend's tii, but it gives so much more controll than the SAFC. Its like a step away from a standalone.
#9
Full Member
Thread Starter
Join Date: Mar 2003
Location: Sweden
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
play EQ on VZ .. gurgelfisk !
Bebesito21,
when you get the data to the PC can you get any value's in the same graf so you can tune from that after driveing for a while ?
/bo
Bebesito21,
when you get the data to the PC can you get any value's in the same graf so you can tune from that after driveing for a while ?
/bo