Greddy profec e-01, emanage combo on the FC
 

Been looking into a fuel computer, boost controll, gauges setup and seems this combo is the way to go ...

I'm planing to use the e-01 display instead of gauges when i drive normaly (a/f, boost, and some).
I'll get a wideband lambda that can give the 0-1 and 0-5 reading and connect the 0-5 to the analog signal input so i can map on the wideband values and have the ecu get the normal feed from the 0-1 cable.

Is anyone here currently running it on there FC(t2) ?

Does a FC pass emissions with it ?

Can I actualy use the analog signal input to measure a brodband lambda and get that value on the same graf as the rest of the data (rew, boost)? or is there something that i will have to use that input to ?

also .. is it possible to connect more then one analog signal input ? would be cool to have ex.t temp and water temp, oil .. et.c in the same data sheet ...

/bo

http://www.mohdparts.com/emanage/pho...hotos/opt2.JPG

it's 2 channels of extra stuff that can get connected :)

/bo, posting and researching the same time !

i wanted to use the e01/emange combo too. is it worth it?

Dale Clark is the only person I know of that is running the e-manage on an FC. Yes the e-01 can be used in conjunction with the e-manage, as well as the greddy guages. You can find him over on teamfc3s.

/bo..... you so play Ragnarok dont you.

/bawi

Im running the emanage on my fc and my friend had it on his T2. Works well. Much better than the SAFC II i had.

Does the ignition timing control actually work for you?

Yeah. I had to install the greddy map sensor too. It worked alot more effectively on my friend's tii, but it gives so much more controll than the SAFC. Its like a step away from a standalone.

play EQ on VZ .. gurgelfisk !

Bebesito21,

when you get the data to the PC can you get any value's in the same graf so you can tune from that after driveing for a while ?

/bo

wow cross game emotes, /bo in both games n/m

How does the timing controll function on it work on our cars?