Greddy Profec b Spec II Help
#1
Full Member
Thread Starter
Join Date: May 2004
Location: Bay Area
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Greddy Profec b Spec II Help
Hey guys...did a search and cant find much. I need to know what numbers I should be roughly around on my boost controller settings. I know every ones will be very different, but the number range is so big that I think Id get a better idea of how to tune it myself when I know what others are running.
I have the following + more...heres the important stuff:
- T04E 60 Trim
- RB Full Exhaust w/ 3" Downpipt
- 50mm Wastegate
- HKS Manifold
- Greddy Intercooler
Setting on my Profec are:
Lo - 94
Gain - 1
Set Gain/Boost - 12
Does this seem right? I have a 11.5lb spring and I want to boost around 14/15 max. Boost Cut is set to 16.5. As-is, can run through the gears and not boost creep most of the time...but sometimes it does. The catch is when it does run throgh with no boost creep, my boost sits at about 11/12lbs. What should I adjust to make bring my boost up?
I have the following + more...heres the important stuff:
- T04E 60 Trim
- RB Full Exhaust w/ 3" Downpipt
- 50mm Wastegate
- HKS Manifold
- Greddy Intercooler
Setting on my Profec are:
Lo - 94
Gain - 1
Set Gain/Boost - 12
Does this seem right? I have a 11.5lb spring and I want to boost around 14/15 max. Boost Cut is set to 16.5. As-is, can run through the gears and not boost creep most of the time...but sometimes it does. The catch is when it does run throgh with no boost creep, my boost sits at about 11/12lbs. What should I adjust to make bring my boost up?