Grams Performance Fuel Injector Kit?
#1
Junior Member
Thread Starter
Grams Performance Fuel Injector Kit?
Anyone have any experience with this brand?
G2-1000-1000 - Grams Performance
G2-1000-1000 - Grams Performance Fuel Injector Kit - garage16
I want to upgrade my fuel system over the winter, and these are a bit cheaper than id's so I thought I'd ask if anyone knows of them or is using them.
Also on a side note, either these or id 1000cc x4, + FFE lower o-ring inserts, aeromotive stealth 340 (11141), and rtek 1.8, good start? Or am I missing something there? FPR maybe?
G2-1000-1000 - Grams Performance
G2-1000-1000 - Grams Performance Fuel Injector Kit - garage16
I want to upgrade my fuel system over the winter, and these are a bit cheaper than id's so I thought I'd ask if anyone knows of them or is using them.
Also on a side note, either these or id 1000cc x4, + FFE lower o-ring inserts, aeromotive stealth 340 (11141), and rtek 1.8, good start? Or am I missing something there? FPR maybe?
#2
Sharp Claws
iTrader: (30)
those are pricey, and i have never heard of them before...
ID's are $240 a pair.
http://www.ebay.com/itm/Injector-Dyn...lVUMG8&vxp=mtr
these are $190 a piece?
sorry, math not adding up to them being cheaper. or perhaps you misread and assumed IDs were not typically sold in pairs.
ID's are $240 a pair.
http://www.ebay.com/itm/Injector-Dyn...lVUMG8&vxp=mtr
these are $190 a piece?
sorry, math not adding up to them being cheaper. or perhaps you misread and assumed IDs were not typically sold in pairs.
Last edited by RotaryEvolution; 01-04-17 at 12:26 AM.
#3
Junior Member
Thread Starter
those are pricey, and i have never heard of them before...
ID's are $240 a pair.
Injector Dynamics ID1000 1000cc Injectors FC 13b RX7 87-92 Mazda Turbo2 11mm | eBay
these are $190 a piece?
sorry, math not adding up to them being cheaper. or perhaps you misread and assumed IDs were not typically sold in pairs.
ID's are $240 a pair.
Injector Dynamics ID1000 1000cc Injectors FC 13b RX7 87-92 Mazda Turbo2 11mm | eBay
these are $190 a piece?
sorry, math not adding up to them being cheaper. or perhaps you misread and assumed IDs were not typically sold in pairs.
#4
Theoretical Tinkerer
iTrader: (41)
Overall I'd suggest against it:
-Unknown brand. Unless they are known to just re-brand quality parts for importation purposes.
-They list applications for the pre-84 cars that were only carbeurated. Makes me question if they've done much work with the install kit.
-Most engineering companies will spend money on R&D instead of models doing un-boxing videos. Maybe it's different in Canada.
-Unknown brand. Unless they are known to just re-brand quality parts for importation purposes.
-They list applications for the pre-84 cars that were only carbeurated. Makes me question if they've done much work with the install kit.
-Most engineering companies will spend money on R&D instead of models doing un-boxing videos. Maybe it's different in Canada.
#6
Junior Member
Thread Starter
Personally I couldn't care less about flashy boxes, it was the potential to save 140$ that I thought made it worth asking about. Thats almost an FPR in savings right there. I do see what you're saying though, and agree with the points brought up. Looks like I'll play it safe and go with id's.
Thanks for the input guys!