2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Got the Fc3s, but already got a minor prob :)

Thread Tools
 
Search this Thread
 
Old Oct 14, 2006 | 05:29 PM
  #1  
husa's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2006
Posts: 12
Likes: 0
From: Finland
Got the Fc3s, but already got a minor prob :)

Allright, bought the 7. The car works perfectly, but it's got that annoying uneven idle when warm. It starts great when warm or cold, but when it warms up good enough the idle is somewhat jerky. It pulls nicely and just like we thought it would.

The previous owner thought it might be the TPS, and it hopefully is. I don't think that I'll check the old one, I'll just get a new one for sure. (45€ not that bad). It pulses a bit and the idle is rough, but it feels that the engine bushings need replacement, so I've been thinking.. Might it just be that the engine shakes a bit too much?

sry, bout my bad english I'm a bit wasted and it's 1.30am
Reply
Old Oct 14, 2006 | 07:22 PM
  #2  
alwayssideways's Avatar
Nurse I need 1300cc's NOW
Tenured Member 05 Years
 
Joined: Dec 2003
Posts: 1,261
Likes: 1
From: Hartford
might be the TPS. Although a bad tps causes hesitations sometimes. Before spending money on a part that might not be bad. Check the tps first.
Reply
Old Oct 14, 2006 | 08:10 PM
  #3  
My5ABaby's Avatar
Rotaries confuse me
Tenured Member 10 Years
iTrader: (7)
 
Joined: May 2006
Posts: 4,219
Likes: 3
From: Murfreesboro, TN
Originally Posted by husa
Allright, bought the 7. The car works perfectly, but it's got that annoying uneven idle when warm. It starts great when warm or cold, but when it warms up good enough the idle is somewhat jerky. It pulls nicely and just like we thought it would.

The previous owner thought it might be the TPS, and it hopefully is. I don't think that I'll check the old one, I'll just get a new one for sure. (45€ not that bad). It pulses a bit and the idle is rough, but it feels that the engine bushings need replacement, so I've been thinking.. Might it just be that the engine shakes a bit too much?

sry, bout my bad english I'm a bit wasted and it's 1.30am
Don't just throw parts at your car. It's a TOTAL waste of money. Test it, adjust it, then, if it doesn't work, get a new one.
Reply
Old Oct 14, 2006 | 08:20 PM
  #4  
Hecubus84's Avatar
Informed Appreciation
Tenured Member 15 Years
iTrader: (1)
 
Joined: Oct 2005
Posts: 572
Likes: 4
From: Detroit Jr.
Make yourself a code checker, its easy and its the best way to find out electrical problems with your engine. There is a good writeup here.

I'd also start replacing your ground cables, the 7 has a nasty problem with these corroding.

Cheers
Reply
Old Oct 15, 2006 | 03:30 AM
  #5  
husa's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Oct 2006
Posts: 12
Likes: 0
From: Finland
Thank you for the answers. I'll check the tps today, and see if it'll fix the prob.
Reply
Old Oct 25, 2006 | 06:22 AM
  #6  
RETed's Avatar
Lives on the Forum
Tenured Member 10 Years
 
Joined: Feb 2001
Posts: 26,664
Likes: 23
From: n
Before you go blaming the TPS...
DO A COMPRESSION TEST.
You should've done a compression test before buying the car.
A compression test will give you the best indication if the engine is good or bad.
Bad compression can cause all the symptoms you're describing.


-Ted
Reply




All times are GMT -5. The time now is 09:29 AM.