Gave a try at fiberglassin,, indiot light gauge bezel <pics>
Thread Starter
Nurse I need 1300cc's NOW
Joined: Dec 2003
Posts: 1,261
Likes: 1
From: Hartford
Gave a try at fiberglassin,, indiot light gauge bezel <pics>
I know its not close to being done but what to you guys think ??? This is my first try.. I still need to sand it down more, and fill it . but im pretty happy . ive learned alot today
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
That's cool. Someone has to make one that elevates the gauges a little, leaving a small window open underneath so that you can still see the idiot lights/clock.
Thread Starter
Nurse I need 1300cc's NOW
Joined: Dec 2003
Posts: 1,261
Likes: 1
From: Hartford
sanded down a bit and test fitted. all in all it fit pretty good ,, i just have to build up the mounting side a little bit. the one pic is looking down through the windsheild. ive got another day of work on this thing to get it working right . but so far i like it
Trending Topics
Thread Starter
Nurse I need 1300cc's NOW
Joined: Dec 2003
Posts: 1,261
Likes: 1
From: Hartford
im doing it all by hand right now .. i cant find my palm sander. i had some more sanding to do , but i might pick up one of those black and decker mouse sanders. i have the B & D dremel rotary tool and i love it. I have some small cracks i have to fix. but im getting there
Originally Posted by Aaron Cake
That's cool. Someone has to make one that elevates the gauges a little, leaving a small window open underneath so that you can still see the idiot lights/clock.
i'd pay for that
I wonder if you can pull the warning lights forward underneath the gauges....
That would be pretty cool. An all-in-one peice that holds 3 gauges and the warning lights just in front/below them....
That would be pretty cool. An all-in-one peice that holds 3 gauges and the warning lights just in front/below them....
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
The FC3S CF dash cover/pod setup is pretty nice, that's what I've got on my GTUs with 2 60mm's in it, then I've got 2 52mm's in the radio area, and two more on the pillar.
Originally Posted by SonicRaT
The FC3S CF dash cover/pod setup is pretty nice, that's what I've got on my GTUs with 2 60mm's in it, then I've got 2 52mm's in the radio area, and two more on the pillar.
Joined: Dec 2001
Posts: 10,630
Likes: 3
From: NY, MA, MI, OR, TX, and now LA or AZ!
Not to get off topic too much, but I've got:
Boost & EGT (ontop of the dash)
Water temp / oil pressure (radio din plate)
Wideband / Intake temp (pillar)
On-topic:
I've seen a few people using the idiot cluster pods and then relocating their idiot lights down to the radio/din area. There were a few pics of this a while ago, anybody remember the thread?
Boost & EGT (ontop of the dash)
Water temp / oil pressure (radio din plate)
Wideband / Intake temp (pillar)
On-topic:
I've seen a few people using the idiot cluster pods and then relocating their idiot lights down to the radio/din area. There were a few pics of this a while ago, anybody remember the thread?
Locust of the apocalypse
Joined: Apr 2003
Posts: 2,553
Likes: 2
From: Directly above the center of the earth (York, PA)
Originally Posted by Aaron Cake
That's cool. Someone has to make one that elevates the gauges a little, leaving a small window open underneath so that you can still see the idiot lights/clock.
I WAS going to move my idiot light cluster.... HOWEVER... I've decided instead to install LED's in my pod and hook those up to the stock wriring harness for the idiot light cluster for the more important lights (low Oil level, etc) and then route the rest (e-brake, hatch open, etc) down to the black face below the stereo where i have the profec mounted.
I'm going to start glassing over the framework tonight!!!
Thread
Thread Starter
Forum
Replies
Last Post
zuesskroph
2nd Generation Specific (1986-1992)
0
Aug 13, 2015 06:05 PM