Gauge Cluster Swap
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Largo, FL
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Gauge Cluster Swap
I have been searching for an hour now and haven't found the answer to my question. Please don't flame me for this.
I have a 1987 Turbo II and I was wondering if I would be able to swap out my current gauge cluster for a N/A. If so, what do I need in order to do this, ie wire harness etc.
Also, are able to take out your speedometer and put it into the N/A cluster so I still have the current millage?
Thanks,
Mike
I have a 1987 Turbo II and I was wondering if I would be able to swap out my current gauge cluster for a N/A. If so, what do I need in order to do this, ie wire harness etc.
Also, are able to take out your speedometer and put it into the N/A cluster so I still have the current millage?
Thanks,
Mike
#2
Former Moderator. RIP Icemark.
Yes, But
The NA gauge set will work, and plug right in if you get the NA gauge sets Harness. If you don't get the NA gauge harness, then you will need to move pins and wires in the plugs.
Speedos swap right out. Just un-screw the old one and screw the new one in.
The NA gauge set will work, and plug right in if you get the NA gauge sets Harness. If you don't get the NA gauge harness, then you will need to move pins and wires in the plugs.
Speedos swap right out. Just un-screw the old one and screw the new one in.
Thread
Thread Starter
Forum
Replies
Last Post