2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

gauge cluster not working

Thread Tools
 
Search this Thread
 
Old Jun 29, 2009 | 06:32 AM
  #1  
Todd M's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 39
Likes: 0
From: NC
gauge cluster not working

i have power to the fuse,fuse not blown,but no power to cluster i removed the cluster and had no power at plugs, lights work but not gauges , is there a relay or ground im missing any advise appreciated 87 na to s5 turbo swap
Reply
Old Jun 29, 2009 | 06:52 AM
  #2  
HAILERS2's Avatar
Rotary Freak
 
Joined: Jul 2008
Posts: 1,660
Likes: 2
From: FORT WORTH TEXAS
Originally Posted by Todd M
i have power to the fuse,fuse not blown,but no power to cluster i removed the cluster and had no power at plugs, lights work but not gauges , is there a relay or ground im missing any advise appreciated 87 na to s5 turbo swap

Power goes from the Meter fuse to the connector b/t the Front harness and the Me harness called FME-01 then on to the round plug on the back of the instrument cluster. Should be there on the black/yellow wire.

None of that should have changed if you just put a turbo engine in a non turbo car. So what other items did you change out other than the engine?
Attached Thumbnails gauge cluster not working-meterfuseagain.jpg  
Reply
Old Jun 29, 2009 | 07:14 AM
  #3  
Todd M's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2008
Posts: 39
Likes: 0
From: NC
i changed the ecu but put the original back in to check ,i did hook up the 5th rev plugs but unhooked to check also i added boost gauge and turbo pressure sensor.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
Mar 17, 2022 02:46 PM
Heedlessone
Group Buy & Product Dev. FD RX-7
288
Sep 16, 2018 07:22 PM




All times are GMT -5. The time now is 02:35 AM.