2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

gas line?

Thread Tools
 
Search this Thread
 
Old 12-29-06, 07:42 PM
  #1  
Senior Member

Thread Starter
iTrader: (1)
 
mightymite's Avatar
 
Join Date: May 2006
Location: southern indiana
Posts: 363
Likes: 0
Received 0 Likes on 0 Posts
gas line?

i just replaced the gasline with goodyear gaslines they look the same as the factory lines... but will they hold up same because i aslo saw some other lines with a inner liner for fuel injection. doest the stock pump above 60 psi? will i be ok?
Old 12-29-06, 08:42 PM
  #2  
Senior Member

 
cezonetheillest's Avatar
 
Join Date: Feb 2004
Location: spokane wa
Posts: 657
Likes: 0
Received 0 Likes on 0 Posts
i am using the same fuel line. its expensive stuff. lol cost me 35 bucks for 6 feet. but i haven't had any issues with it and ive been running if for 4 months with the turbo fuel pump;
Old 12-29-06, 08:46 PM
  #3  
2nd Gen. Enthusiast

 
Rotary_Rocket_87's Avatar
 
Join Date: Feb 2006
Location: New Hampshire
Posts: 388
Likes: 0
Received 0 Likes on 0 Posts
As long as it is marked "fuel injection line" you will be OK. And yes, it is about 5-6 USD a foot. If you bought some fuel hose that was like 1-2 USD per foot it isn't rated for fuel injection.
Old 12-29-06, 09:47 PM
  #4  
Lives on the Forum

 
RETed's Avatar
 
Join Date: Feb 2001
Location: n
Posts: 26,664
Likes: 0
Received 17 Likes on 16 Posts
If it says "30R7", then this is for carbs only.
Do NOT use it on your FC.

You need the "30R9" rated line for fuel injection.

It sounds like you got the 30R7 type.


-Ted
Old 12-31-06, 06:55 PM
  #5  
Senior Member

Thread Starter
iTrader: (1)
 
mightymite's Avatar
 
Join Date: May 2006
Location: southern indiana
Posts: 363
Likes: 0
Received 0 Likes on 0 Posts
i put on 30r7 fuel hose its rated at 50psi but what i found out at two sites the stock pump is rated at 40psi... what is my stock n/a s4 gxl fuel pump rated at 40psi? if the hose is rated at 50psi i should be alright?
Old 01-02-07, 12:04 AM
  #6  
Lives on the Forum

 
RETed's Avatar
 
Join Date: Feb 2001
Location: n
Posts: 26,664
Likes: 0
Received 17 Likes on 16 Posts
Originally Posted by mightymite
if the hose is rated at 50psi i should be alright?
NO.


-Ted
Old 01-08-07, 10:14 PM
  #7  
Senior Member

Thread Starter
iTrader: (1)
 
mightymite's Avatar
 
Join Date: May 2006
Location: southern indiana
Posts: 363
Likes: 0
Received 0 Likes on 0 Posts
looks like i have to get the other kind of line...then take off the line i just put on. oh well =/ ill have to take off the uim anyways to block off the emissions
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rotospectre
New Member RX-7 Technical
3
03-28-18 03:33 PM
rotor_veux
2nd Generation Specific (1986-1992)
5
09-03-15 07:10 PM



Quick Reply: gas line?



All times are GMT -5. The time now is 12:57 PM.