funny noise
funny noise
Well my engine( I guess) started making a funny noise. It is RPM dependant and you can't hear it after like 3k I believe. Its kind of a whine. I can't hear it from the outside, only through the dash. I really can't figure it out, I hope it goes away when I get my engine rebuilt though. Any ideas?
Ok, I narrowed it down some. Apparently it is not RPM dependant directly. It depends on my voltage. At lower RPMs voltage goes to around 13.5-13.7. Brakes, lights, a/c all have an effect on the noise and its volume. The noise is something like a pulley noise, not sure really though. Do alternators make any noise before they go out? I've never had one do so, but you never know.
It means you have to many restrictions on your exhaust system. I can't even hear my radio, much less a whine noise from the dash
The 3" open pipes with dual N1's prevent any "funny" noises.
Robert
The 3" open pipes with dual N1's prevent any "funny" noises. Robert
Originally posted by Rpeck
It means you have to many restrictions on your exhaust system. I can't even hear my radio, much less a whine noise from the dash
The 3" open pipes with dual N1's prevent any "funny" noises.
Robert
It means you have to many restrictions on your exhaust system. I can't even hear my radio, much less a whine noise from the dash
The 3" open pipes with dual N1's prevent any "funny" noises. Robert
Originally posted by slow87turbo
well the alt. does have berings in there. maybe your berings are going out becouse when you load the alt the noise gets louder right? some thing to think about.
ej
well the alt. does have berings in there. maybe your berings are going out becouse when you load the alt the noise gets louder right? some thing to think about.
ej
wELL I would redo all my grounds just for the hell of it. But does sound like to be alternator related. Check the belt and see if it tight. IT might be slip at high RPM ro under heavy load.
Last edited by twistedriver; Sep 22, 2003 at 03:16 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Linda_Lovelace
General Rotary Tech Support
0
Sep 18, 2015 10:04 PM



