need to know what work preasure a turbo2 s5 fuelrail have ... the people that will clean mine need to know before they can start !

and i need them back asap !

/bo, thanx in advance

 

at idle?

 

not sure .. they need it to know what preasure to set there tool to pump when they run the cleaning fluid true them ...

they said "work load preasure" .. translated from swedish, so maby not 100% accutare..

/bo

 

to clean the injectors?

 

yes

 

The best way to do that is to have them taken out and serviced

 

for the people that will search for this in the future ..

the preasure according to the manual is 2.3 to 2.6 bar ..
http://www.teamfc3s.org/main/factory...tems_turbo.pdf

/bo

 

That makes sense. I was going to guess around 35psi.

 

The specified static fuel pressure (pump on, engine off) is 235-275kPa (34-40psi). That's the pressure the injectors are rated at (i.e. 550cc/min @ 250kPa) and so that's the pressure they should be tested and measured at.