Fuel Pumps???
10-06-01, 01:44 AM
#1
Senior Member
Thread Starter
iTrader: (1)
Join Date: Jul 2001
Location: Avondale, AZ
Posts: 257
Likes: 0
Received 0 Likes
on
0 Posts
Fuel Pumps???
I want to upgrade my TII fuel pump and wants to know what's the best choice. I'm aiming for about 250 at the wheel. What other pumps are out there, besides the Walbro and RP pump? How's the install and performance? Any info. would be great. Thanks.
10-06-01, 01:50 AM
#2
HyperREV.com
Join Date: Mar 2001
Location: Oregon
Posts: 1,162
Likes: 0
Received 0 Likes
on
0 Posts
well, there is a lot of pumps out there. but as far as recommended, and ones everyone has experience with its just the walbro and rp. i mean most of what everyone uses the walbro. just look in all the sigs
of course there is the fd pump, and the cosmo. but those are pretty high priced. most people use the walbro cause its the best bang for the buck. and actually outflows some of the more expensive down the line.
if your going all out though you might want to check into some bigger flowing pumps. but for the basic bolt on's and the ranger your looking for, my 2 cents goes to walbro.
brando
of course there is the fd pump, and the cosmo. but those are pretty high priced. most people use the walbro cause its the best bang for the buck. and actually outflows some of the more expensive down the line.
if your going all out though you might want to check into some bigger flowing pumps. but for the basic bolt on's and the ranger your looking for, my 2 cents goes to walbro.
brando
10-06-01, 05:18 AM
#3
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
personally i'll be using a R32 GTR Skyline pump to feed my 4 x 800cc secondary injectors.............. i got the pump for equal to $57US and it's rated at 4.5L per min at 35-40psi
10-06-01, 01:02 PM
#5
inteligent extratarestril
Join Date: Mar 2001
Location: The Sunny B.O.P, New Zealand
Posts: 1,313
Likes: 0
Received 0 Likes
on
0 Posts
well yes and no, you can simply take the pump itself off the pump/sensor assembly off the skyline and connect it to the factory in tank assembly on the rx7. i will be running two pumps, the factory one to supply my 2 primary injectors, and the skyline one to feed the 4 secondaries, i am getting a 30-35litre custom made tank which will eliminate surge without needing to run a surge tank.
As for where did i get it - I am down in New Zealand, so where i got mine from aint much good to you.
As for where did i get it - I am down in New Zealand, so where i got mine from aint much good to you.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM
ChrisRX8PR
Single Turbo RX-7's
21
10-18-15 04:01 PM