What kind of gauge goes on the top of the fuel pressure regulator? Anyone know of a brand. I was looking at the one on rx7storel.net. It's a SX i believe. I wouldn't think this would be that hard to instal. Does it just tap into the fuel supply line?

 

someone

 

My friend has one on his honda, i'll hunt him down tonight as ask him if no one else knows.

 

Thanks man most people have them on there Turbo II's. I just want to know what kind to buy

 

I used an Earls type fuel pressure gauge on the SaRD adj. FPR I had.
Id do both at one time as the aftermarket FPR will usually have a gauge port machined into it.

 

I'm not to sure of this thread. If your looking to see what the fuel pressure is in the rail (governed by the fpr), you really just need to TEE into the feed line after the fuel filter. It'll give you the rail pressure since it's upstream of the fuel rail. Ignore this post if you mean another thing.

 

stock FPR?? nothing goes into it. if you want to install a gauge you'd have to cut and "T" the fuel line before the FPR.

if you are trying to say you have an SX FPR and want to put on a gauge. then yes it's easy. and any one will work. and not that hard.

if you are trying to ask if the SX PFR is easy to install. then the answer is no.

 

if you are trying to say you have an SX FPR and want to put on a gauge. then yes it's easy. and any one will work. and not that hard.

yes hah that's what i've got now what gauge should i buy.