Fuel Injector connectors for the harness
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Fuel Injector connectors for the harness
I want to get some info on getting a set of injector connectors for my 91 High IMP injectors. They are kinda a rounded connector which doesn't fit my 87 so I want to have a new set of connectors so I can use my 91 injectors which are probably in better shape than my old 87 injectors LOW IMP I am unplugging the resistor pack when I use the 91's but I need the connectors for them. Do any of you all know where I can get the clips alone? I remember reading they are a standardized part but I wouldn't know where to search for them or if they fit proper on the FC's injectors.
Thanks in advance guys. :p
Santiago
Thanks in advance guys. :p
Santiago
FI Connectors
I just bought a set of these for my S4 TII.

Fuel Injector Connectors
They seem to work ok for me and are pretty cheap considering you get em for $3 each. May need to grind down the notch on the injector as these connectors are center notched. I could have gotten the correct notch position connectors for $18 each at Standard Auto--but that's way to expensive.
Hope they works for you.
Scott
PS: They also work on the BAC and water thermo sensor (S4).
Fuel Injector Connectors
They seem to work ok for me and are pretty cheap considering you get em for $3 each. May need to grind down the notch on the injector as these connectors are center notched. I could have gotten the correct notch position connectors for $18 each at Standard Auto--but that's way to expensive.
Hope they works for you.
Scott
PS: They also work on the BAC and water thermo sensor (S4).
Open up! Search Warrant!
Joined: May 2002
Posts: 3,838
Likes: 3
From: Kicking down doors in a neighborhood near you
I got a 6 pack of those on ebay but the ones I got were already put together and have 6 inches of wire soldered on so you can have something to work with when you splice it in.
Thread Starter
Joined: Nov 2002
Posts: 12,752
Likes: 1
From: Laredo, Tx
Open up! Search Warrant!
Joined: May 2002
Posts: 3,838
Likes: 3
From: Kicking down doors in a neighborhood near you
yeah, I got a set of them from that same guy. It says they are for Nissans but they fit and work perfectly on the square plugged injectors with the center notch.
Trending Topics
Open up! Search Warrant!
Joined: May 2002
Posts: 3,838
Likes: 3
From: Kicking down doors in a neighborhood near you
Na, they only work on the 84-85 N/A 680cc injectors and the 86-87 N/A 460cc and 550cc TII injectors causes are the years that have square plugs with center notches.
take an injector to the junk yard.
i did that and ended up getting them off a 240sx harness
cost like 5 bucks but i knew they would work.
Some times the junk yard guys are kewl and don't care.
just an option
i did that and ended up getting them off a 240sx harness
cost like 5 bucks but i knew they would work.
Some times the junk yard guys are kewl and don't care.
just an option
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
82streetracer
1st Generation Specific (1979-1985)
7
Aug 23, 2015 09:28 AM
86rxNa
2nd Generation Specific (1986-1992)
2
Aug 11, 2015 11:51 AM




