fuel gauge, horn, clock?
#2
Full Member
Join Date: Nov 2002
Location: california,bay area
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
i had the same problem on my 88 n/a .......lets start with the clock,take aparts and resolder all the pins on it .......the fuel gauge ...replace it and the horn is that little pin in the steering wheel is probably worn out!
#4
Junior Member
Join Date: Apr 2002
Location: modesto, ca
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
The cpu is on the drivers' side behind the kick panel, there's a good write up on how to resolder it. Do a google search on "cpu cold solder" and you'll find it. I just did this not too long ago. Clock, etc. works great now.
-W
-W
Thread
Thread Starter
Forum
Replies
Last Post