fuel filter sludge oil. 2 stroke?
#1
Rotary Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Pasadena
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
fuel filter sludge oil. 2 stroke?
Hey guys, I changed my fuel filter today, and a lot of oil came out of it. Do you think that could have been some of the 2 stroke additive being caught in it along with the dirty stuff? Or is it just dirty stuff in the fuel?
#3
Rotary Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Pasadena
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
Well, I never ran 2 sroke, but the guy that owned it before had added valvoline 2 stroke oil in it before I believe. He had put the omp back on to sell the car.
#5
Rotary Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Pasadena
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
I beleive so. he told me he ran 2 stroke oil for a little bit, I believe it was valvoline.
When I unhooked the fuel line, fuel came out, then after a while, some oil came out of there. Im guessing the fuel filter is catching the 2 stroke oil?
When I unhooked the fuel line, fuel came out, then after a while, some oil came out of there. Im guessing the fuel filter is catching the 2 stroke oil?
#6
Rotary Enthusiast
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
interesting i all ways wondered if that would happen or if it could happen?? il have to pull mine off and see, im using Castrol GTX 2 cycle oil, but il pull mine off tomorrow and see if theres any oil stuck in there if so i guss we will have to buy snow machine fuel filters
#7
Rotary Enthusiast
Thread Starter
Join Date: Mar 2007
Location: Pasadena
Posts: 1,485
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I remmeber someone posting a quesiton ,"what fuel filter to use with 2 stroke?"
2 stroke additive is the only thing I could think of. So I guess that means not all the 2 stroke additive is getting to the engine. Unless that oil is something else.
The oil didnt look black or anything. It looked clean, but I could totally tell that it was not gasoline
2 stroke additive is the only thing I could think of. So I guess that means not all the 2 stroke additive is getting to the engine. Unless that oil is something else.
The oil didnt look black or anything. It looked clean, but I could totally tell that it was not gasoline
Trending Topics
#8
Banned. I got OWNED!!!
Join Date: Dec 2006
Location: Palmdale Ca
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
which 2 stroke premix should i use?
hey i have the same question i have just been adding a lil bit of mobile non synthetic oil to my gas but i was reading on about the 2 stroke premix which one is better to use ?
#12
Rotary Enthusiast
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
you have to use 2 stroke oil if you adding oil to you gas.
so premix 2 stroke oil is the only way to go if adding oil to your gas.
i have only ran 20$ of gas in my new filter so i hope to see if there is any oil or not in my filter. il post tonight and let you guys know
#13
Rotary Enthusiast
iTrader: (8)
Join Date: Mar 2004
Location: Ontario
Posts: 1,036
Likes: 0
Received 0 Likes
on
0 Posts
if the sock is like a chev sock then id say it should be ok, cause it just stops big chunks its just a small screen, unlike the fuel filters they are paper filters if thats the correct terme to use
#14
HOT DOGS! 8======D
Join Date: Jul 2007
Location: Columbia, MO
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
i read somewhere once that u could have like a resvorior full of 2 stroke oil and like a windsheild washer pump or something like that to shoot it into the oil metering nozzles???? but it defeintly bypassed the STOCK OMP
Thread
Thread Starter
Forum
Replies
Last Post