2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

fuel door...help!

Thread Tools
 
Search this Thread
 
Old Feb 28, 2006 | 09:32 AM
  #1  
jeff_rx7's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Sep 2005
Posts: 56
Likes: 0
From: Guelph Ont.
fuel door...help!

my fuel door will not open. i dont know if it was frozen shut or not, it didn't seem like it. is there any emergency release in the trunk or something?? or will i have to replace the cable. im under 1/4 tank, so please help asap

Jeff
Reply
Old Feb 28, 2006 | 09:42 AM
  #2  
Aaron Cake's Avatar
Engine, Not Motor
Tenured Member: 20 Years
iTrader: (1)
 
Joined: Feb 2001
Posts: 29,798
Likes: 128
From: London, Ontario, Canada
It's likely frozen. Water gets in the cable and then freezes on nights like last night...

You can probably pry it open from the outside with a small bit of wood. I've had to do that and have never damaged the paint. If you can get at it from the inside, you may be able to pull the cable to open it up.

Either way, once you get it open you'll want to dump some oil down the cable to prevent this from happening again.
Reply
Old Feb 28, 2006 | 11:27 AM
  #3  
HAILERS's Avatar
HAILERS
Tenured Member 10 Years
 
Joined: May 2001
Posts: 20,563
Likes: 27
From: FORT WORTH, TEXAS,USA
If the cable feels real *loose*/limp,then it's possible the cable broke at the end that is located inside the car.

Actually it may not be the cable but the part it attaches to at the door, but that is inside the car and hard to feel, see.

I had this happen to me and went to the junk yard and got another release mechanism. The part that has the tit on it that moves out of the way when the cable is pulled.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
Mar 15, 2022 12:04 PM
bryancmatthews
Power FC Forum
14
Oct 5, 2015 08:49 PM
sherff
Adaptronic Engine Mgmt - AUS
5
Sep 12, 2015 12:22 PM
Steven_McKinley
General Rotary Tech Support
12
Sep 5, 2015 10:48 AM




All times are GMT -5. The time now is 09:51 PM.