Ok I'm putting my s4 na back together right now... I'm new to rx7s and read about the dampner delete. I simply don't want it... So I took the banjo bolt and fitting off another 13b and put in place of my fuel dampner. Now the fuel hose is in the way and my omp linkage cannot move freely. What am I missing here? Is this mod only for turbo models? I notice on the turbo models the damner is on the opposite side of the primary rail? How to I fix this. Thanks

 

Are you suppose to use the original fpd line? If so do you need bigger washers?

 

Well, to "fix" this you could remove your OMP linkage and then premix. Other than that, I dont have an N/A anymore and never did that to mine.

 

edit:

you should have a straight fitting on the front of the primary rail, you used the fitting off the spare rail instead of reusing the original.

that is the feed port which needs to aim to the driver side to attach the fuel line off the fuel filter to.

 

Was gonna say I never had a problem doing the mod on my NA, I knew something wasnt right I just didn't know what.

Rotary > Pistons

 

Thank you for the responses... I got the job done and it works good.