fuel cut switch
04-01-03, 11:15 AM
#1
Full Member
Thread Starter
Join Date: Aug 2002
Location: newfane, ny
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
fuel cut switch
ok, i know its been covered a ton of times, and i was just reading the past threads on it. but all of them talk about just cutting the black wire with the white strip and splicing. do u splice all three ends or just two of them? kinda confused on that topic.
o and the use of it. i know this is probly a dumb question but... do u shut the car off then hit the switch or what? cause after thinking about it, i didnt know how it would help if u shut the car off then hit the switch cause the fuel would still be there in the lines to flood the car.
o and the use of it. i know this is probly a dumb question but... do u shut the car off then hit the switch or what? cause after thinking about it, i didnt know how it would help if u shut the car off then hit the switch cause the fuel would still be there in the lines to flood the car.
04-01-03, 11:40 AM
#2
Senior Member
Join Date: Feb 2001
Location: Roanoke
Posts: 501
Likes: 0
Received 0 Likes
on
0 Posts
Ron,
As for the wiring....all you are doing is installing the switch into that wire. You splice wire onto the two ends you cut and then both ends to the switch. When I had my '87, I used the switch to shut off the engine and I left it off when I started the engine. This provided the fastest, smoothest, hot starts. For cold starts, I left the switch in the on position.
As for the wiring....all you are doing is installing the switch into that wire. You splice wire onto the two ends you cut and then both ends to the switch. When I had my '87, I used the switch to shut off the engine and I left it off when I started the engine. This provided the fastest, smoothest, hot starts. For cold starts, I left the switch in the on position.
04-01-03, 01:16 PM
#3
Re: fuel cut switch
Originally posted by ron's rx-7
ok, i know its been covered a ton of times, and i was just reading the past threads on it. but all of them talk about just cutting the black wire with the white strip and splicing. do u splice all three ends or just two of them? kinda confused on that topic.
o and the use of it. i know this is probly a dumb question but... do u shut the car off then hit the switch or what? cause after thinking about it, i didnt know how it would help if u shut the car off then hit the switch cause the fuel would still be there in the lines to flood the car.
ok, i know its been covered a ton of times, and i was just reading the past threads on it. but all of them talk about just cutting the black wire with the white strip and splicing. do u splice all three ends or just two of them? kinda confused on that topic.
o and the use of it. i know this is probly a dumb question but... do u shut the car off then hit the switch or what? cause after thinking about it, i didnt know how it would help if u shut the car off then hit the switch cause the fuel would still be there in the lines to flood the car.
Jarrett
Thread
Thread Starter
Forum
Replies
Last Post
armans
3rd Generation Specific (1993-2002)
5
08-15-15 09:08 PM