FTP "Flash To Pass" lens difference between years ( smoked VS Clear ) .
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .
I don't have the lens on my car and I'm getting ready to order some but they are $98.00 cdn a piece at my local Mazda Dealership.
I just want to make sure I'll order the right one.
I'd like to know which years has the "smoked" one.
I don't know if it is available but is there just a Black cover available instead a lens ?

Thanks.
I just want to make sure I'll order the right one.
I'd like to know which years has the "smoked" one.
I don't know if it is available but is there just a Black cover available instead a lens ?
Thanks.
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .
Ah ok , I didn't know that , I went to the Mazda dealer and the guy came up with 2 different part number for Right and Left ( 2 part number for right , 2 part number for left )
I'll try to get back there this week to find out if he made a mistake or not.
At this price I just want to make sure I'm getting the right one......
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .
I've replaced all lens on my car ( parking lens I mean ) for new one to make her looks good.
I know they look terrible when they gets old.
I bought the car late in October 2009 and it will not sleep outside anymore and neither seen rain again ( unless I get caught ) so the new lens will look new for years. The car is always in a heated garage from now on.
It's my toy that I'm restoring.
Updated pics. here .
I know they look terrible when they gets old.
I bought the car late in October 2009 and it will not sleep outside anymore and neither seen rain again ( unless I get caught ) so the new lens will look new for years. The car is always in a heated garage from now on.
It's my toy that I'm restoring.
Updated pics. here .
Wow...I'm surprised you can buy the FTP still from the dealer. I bought a decent pair on ebay for about $30, but finding a good pair on ebay can be tough, I just created a search that would email me whenever they would pop up. Found a pair up there right now that seem nice
http://cgi.ebay.com/ebaymotors/MAZDA...Q5fAccessories
If you get older ones though, use some type of epoxy to re-enforce the mounts before installing. I used the stuff I think called Steel Epoxy Putty that I got at Lowes that worked great. The mounts tend to weaken over time.
That's a nice car mpcv2000, but I admit mix feelings with seeing a piston engine in an RX-7
. Still, it must be a rocket with the LT1 in there? I've got a vette with the LT-4, they are great engines!
http://cgi.ebay.com/ebaymotors/MAZDA...Q5fAccessories
If you get older ones though, use some type of epoxy to re-enforce the mounts before installing. I used the stuff I think called Steel Epoxy Putty that I got at Lowes that worked great. The mounts tend to weaken over time.
That's a nice car mpcv2000, but I admit mix feelings with seeing a piston engine in an RX-7
. Still, it must be a rocket with the LT1 in there? I've got a vette with the LT-4, they are great engines!
Trending Topics
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .
I bought it already swapped and liked it because it was different then the other cars and it does look stock except the wheels.
Best "toy car" I ever have.
Low end power is nice , you know what I'm talking about.
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .

Have you seen the updated pics. of your ex-car ?
A few post up , pics. are from a few weeks back.
We have 2 option , I drive down to your place and you take your ex-car for a spin and I grab the lens or I send UPS to pick those up to your place.
I'm so happy with the car you sold me , best swapped car ever.
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .
what about the ones in the convertibles, they look smoked, though they are blanks
http://webiol.homenetinc.com/dealers...945/ma2707.jpg
http://media.motortopia.com/files/47...b/P1000869.jpg
even mine look smoked, but they are just a blank on mine, not a light socket or anythign
http://webiol.homenetinc.com/dealers...945/ma2707.jpg
http://media.motortopia.com/files/47...b/P1000869.jpg
even mine look smoked, but they are just a blank on mine, not a light socket or anythign
There is only one p/n for each side for US cars.
FB01-51-360B and FB01-51-370B
There are earlier versions of those parts (FB01-51-360 and FB01-51-360A and the same for the other side) but they are NLA.
FB01-51-360B and FB01-51-370B
There are earlier versions of those parts (FB01-51-360 and FB01-51-360A and the same for the other side) but they are NLA.
Thread Starter
Joined: Oct 2009
Posts: 202
Likes: 0
From: Terrebonne , Quebec .
If yes can you send a email to a admin to let me in ?
I signed up but without even been able to post anything I got banned.
I guess they had problem with spam or what ever they call it and they block all new members.
Martin.
when i bought my car the ftp lenses were spray painted black and looked terrible when light shined through them so i made my own out of plexiglass and painted them with transparent black paint. it was almost free and looks pretty sweet....just a thought instead of spending $60 or so
I have them boxed up, going to send them out USPS for you
the jspec ones with the lights in them are good for you requiring the DTR, the lights are very low power but do the job
the jspec ones with the lights in them are good for you requiring the DTR, the lights are very low power but do the job






