Front lip spoiler
Originally Posted by Node
dude, lip you posted on that white t2 is a STOCK T2 LIP
It came on EVERY s5 t2 made, just they are all broke by now are you will be hard pressed to find an original one that hasnt been cubrchecked to powder already.
And I'm not sure how a s5 lip would look on s4, you could always get a s5 bumper and paint the rubstrips flat black. The rubstrip will be a diff one but the paint and stuff will match.
Or just get all s5 rubstrips and bumpers. You'd have to do the rear bumper too to have them all match.
Up to you jungus
It came on EVERY s5 t2 made, just they are all broke by now are you will be hard pressed to find an original one that hasnt been cubrchecked to powder already.
And I'm not sure how a s5 lip would look on s4, you could always get a s5 bumper and paint the rubstrips flat black. The rubstrip will be a diff one but the paint and stuff will match.
Or just get all s5 rubstrips and bumpers. You'd have to do the rear bumper too to have them all match.
Up to you jungus
I wasn't sure that it was the EXACT T2 Lip the S5 front bumper bottom edge looks more rounded than the S4 so i wasn't sure if that was a one-off or if they fit perfectly, speed machine makes a replica and thats what id buy, i dont want to buy JUST an s5 front cap, or the s5 rub strips, they cost too much, and mis-matching trim levels look hedious. I love the look of the S5 front bummper but i also love the S4 trim shape, the only option then is to cut off the bumper right below the trim line and attach a S5 half alot of work, anyone have a plastic welder?
Former Rx7 *****
Joined: Nov 2001
Posts: 4,534
Likes: 0
From: Mississauga
Originally Posted by Node
also you can get aftermarket lips (ooooh, aaaaaaah)
I heard that RotaryExtreme.com makes a affordable urethane feed lip replica but I have never seen it, only heard of
also corksport.com has a mazdaspeed lip replica
About $200 no matter how you go
demonspeed.com has a lip also but you only use COD ever with them.
btw, for anyone looking at this thread all of these lips are for s5 (89-91) bumper although demonspeed does have an s4 (86-88) lip spoiler
I heard that RotaryExtreme.com makes a affordable urethane feed lip replica but I have never seen it, only heard of
also corksport.com has a mazdaspeed lip replica
About $200 no matter how you go
demonspeed.com has a lip also but you only use COD ever with them.
btw, for anyone looking at this thread all of these lips are for s5 (89-91) bumper although demonspeed does have an s4 (86-88) lip spoiler
No is no such thing as a feed lip replica. I tried to setup the group buy, but zero people ante'd up for $ when teh time came. It was for a urathane FEED front lip at around the 200 to 250 price tag + shipping. FEED original front lip is fibreglass. We all know what happens to fibreglass when you bump it, it cracks, where as the urathane doesn't. But i guess 200 to 250 was too much money for people.
does anyone have a pic. of a s4 with the demonspeed lip? isnt that an s5 showing on there site? just wondering how dif. it will be. sorry never seen a s5 up close except on the net.yes,yes i know, very deprived life i live.
yeah, im gonna get some too, I was thinking of using some t2 s5 side skirts and cutting off the s5 molding so i could leave the s4 molding on. Or ill get some wings west side skirts from mazdatrix.
Originally Posted by 88rxn/a
its almost as if i want some side skirts with the lip to finish the lines,anyone?suggetsions?cheap side skirts?input?
Anyhow, Speed Machine also makes replicas of the stock S5 sideskirts. They look great in my opinion.
Fiberglass - http://speedmachineperformance.com/i...l?v=1&pid=3127
Carbon Fiber - http://speedmachineperformance.com/i...l?v=1&pid=3203
I R SAD PANDA W/O BAW
Joined: Nov 2002
Posts: 6,061
Likes: 1
From: bay area
Originally Posted by JerryLH3
Cheap is all relative. Especially when it comes to FC owners.
Anyhow, Speed Machine also makes replicas of the stock S5 sideskirts. They look great in my opinion.
Fiberglass - http://speedmachineperformance.com/i...l?v=1&pid=3127
Carbon Fiber - http://speedmachineperformance.com/i...l?v=1&pid=3203
Anyhow, Speed Machine also makes replicas of the stock S5 sideskirts. They look great in my opinion.
Fiberglass - http://speedmachineperformance.com/i...l?v=1&pid=3127
Carbon Fiber - http://speedmachineperformance.com/i...l?v=1&pid=3203
You're right, they aren't stock replicas. I noticed that when I looked at them a second time. But they are pretty similar to the stock style, as in not overly aggressive.
[QUOTE=dDuB]If you're talking about the stock s5 TII lip, it is no longer made by mazdaQUOTE]
That is not true. I ordered one from mazda direct just about 2 months ago.
I have a friend that is the parts manager and he got me it quick and it is already black.
That is not true. I ordered one from mazda direct just about 2 months ago.
I have a friend that is the parts manager and he got me it quick and it is already black.
ok, here ya go
Mazda part number for the factory lip spolier in black
FC17-51--HOA-PZ Front Lip Turbo
Mazda part number for the 3 piece little rubber trim for non turbo's
FC01-51-9J1A Center 3 piece
FC01-51-9L1A left side
FC01-51-9K1A right side
Mazda part number for the factory lip spolier in black
FC17-51--HOA-PZ Front Lip Turbo
Mazda part number for the 3 piece little rubber trim for non turbo's
FC01-51-9J1A Center 3 piece
FC01-51-9L1A left side
FC01-51-9K1A right side
Rotary Enthusiast
Joined: Jan 2002
Posts: 975
Likes: 5
From: Puerto Rico Land Of The Fastest Rotaries
Senior Member
Joined: Jan 2003
Posts: 285
Likes: 0
From: oregon
This site has one for a pretty good price http://www.mazsport.net/phpnuke/html/index.php they are out of them right now, he told me that the people who make them are on vacation...
Thread
Thread Starter
Forum
Replies
Last Post
