Found another problem today..... thanks for the help in advance.
10-06-05, 04:30 PM
#1
Psychotic CRITIC™
Thread Starter
Join Date: Jan 2004
Location: Spread Love Its The Brooklyn Way
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Found another problem today..... thanks for the help in advance.
Ok today i bought one of those volt meters for about 35 dollars and tried checking the injector clips for power but all of the four clips tested at 0.65v then they just dropped down to 0.2v. Not sure if thats suppose to be correct of what but thats what happened. Alright now the other problem that i came acroos today was that something told me to pull the fuel rail off, now there wasnt even a drop of fuel in there. I tried blowing through it but nuttin, as if something was blocking it. That makes me beleive that my stock fuel pressure regulator isn't working properly. But that still doesn't explain why the injector clips aren't getting power. Please anyone help me i would really appreciate it. Thanks alot guys.
10-06-05, 09:44 PM
#3
Psychotic CRITIC™
Thread Starter
Join Date: Jan 2004
Location: Spread Love Its The Brooklyn Way
Posts: 522
Likes: 0
Received 0 Likes
on
0 Posts
Not sure how to.
i was about to check the pins then i didnt know what to do. should I just pry the top off and check??? or is it the plug to the afm dat i check?? I checked the plug and i was getting 12v from a few of them.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM