2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

FMIC VS TMIC(with meth)

Thread Tools
 
Search this Thread
 
Old Aug 2, 2008 | 04:09 PM
  #1  
turbo-111's Avatar
Thread Starter
10 pounds sounds so nasty
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 399
Likes: 0
From: N.C.
FMIC VS TMIC(with meth)

i was doing some research and almost everyone says go vm or fm. however i have seen some go and use the factory tmic with meth and get some pretty impresive numbers. one person was able to run i belive 21psi on the stock tmic with meth( could be wrong its been a few days since i looked at it). the kit im looking at runs about 247 the fm universal kit runs at 174 with out the cutting and welding. what im wondering is which is the cheapest and the best way to go ?
Reply
Old Aug 2, 2008 | 04:25 PM
  #2  
wackaloo13's Avatar
Rotary Enthusiast
Tenured Member 05 Years
iTrader: (3)
 
Joined: Jan 2007
Posts: 1,000
Likes: 0
From: st. louis
you cant ditch the intercooler all together if you are running enough meth
Reply
Old Aug 2, 2008 | 07:52 PM
  #3  
turbo-111's Avatar
Thread Starter
10 pounds sounds so nasty
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 399
Likes: 0
From: N.C.
sweet well then how much boost can be push'd with the stock turbo with meth ?
Reply
Old Aug 2, 2008 | 09:45 PM
  #4  
Turbo II Rotor's Avatar
Who Shot the Sheriff?
Tenured Member 10 Years
iTrader: (2)
 
Joined: Jan 2007
Posts: 3,858
Likes: 2
From: Aurora, CO
Depends how much meth you want to pump into the engine. I suggest asking around in the "ai" subforum.
Reply
Old Aug 2, 2008 | 10:21 PM
  #5  
turbo-111's Avatar
Thread Starter
10 pounds sounds so nasty
Tenured Member 05 Years
 
Joined: Sep 2006
Posts: 399
Likes: 0
From: N.C.
ahhh thanks
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
eplusz
General Rotary Tech Support
15
Oct 7, 2015 04:04 PM
msilvia
3rd Generation Specific (1993-2002)
15
Sep 11, 2015 12:13 PM




All times are GMT -5. The time now is 07:46 PM.