First Time Removing Turbo
I am going to remove my turbo on my TII to port the wastegate. When I remove the turbo and other components to get to the turbo is there any o-rings or gaskets I should buy from Mazda ahead of time to replace during the modification?
I want to replace all the gaskets/o-rings I come across, because I know they are common parts that wear out, but I would like someone to tell which ones I need to buy before I tear things apart, and find them myself, because everything I get from mazda these days is special order and it takes a few days before I get the parts
Trending Topics
Gaskets
EGV 1,
BAC 1,
turbo bottom oil drain line 2,
turbo oil top 1,
coolant feed 1 to LIM
turbo to manifold,
turbo to downpipe,
manifold to engine,
Hoses
coolant return 60deg bend
radiator upper and lower
air pump feed and output
4 of 16mm aluimnuim crush washers for cooland feed and return off of turbo
remove turbo heat sheild and get the Defi turbo kit witch has turbo heat sheild blanket and some exhaust wrap. adn use that instead of the old heat sheilds
EGV 1,
BAC 1,
turbo bottom oil drain line 2,
turbo oil top 1,
coolant feed 1 to LIM
turbo to manifold,
turbo to downpipe,
manifold to engine,
Hoses
coolant return 60deg bend
radiator upper and lower
air pump feed and output
4 of 16mm aluimnuim crush washers for cooland feed and return off of turbo
remove turbo heat sheild and get the Defi turbo kit witch has turbo heat sheild blanket and some exhaust wrap. adn use that instead of the old heat sheilds
Actually I removed my turbo recently to clean it up. I bought a j-spec engine and the turbo was covered in gunk and I need to replace the studs on it. Can I get the gaskets and hoses at any auto part store or do I need to go to my crappy local Mazda dealership? Thanks!
remove turbo heat sheild and get the Defi turbo kit witch has turbo heat sheild blanket and some exhaust wrap. adn use that instead of the old heat sheilds[/QUOTE]
would you mind sending a link to this defi turbo kit that comes with a blanket and exhaust wrap i been wanting to get some but didnt know where to look
would you mind sending a link to this defi turbo kit that comes with a blanket and exhaust wrap i been wanting to get some but didnt know where to look
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
Frisky Arab
2nd Generation Specific (1986-1992)
13
Aug 18, 2015 05:30 PM






