Firing Order
#1
Full Member
Thread Starter
Join Date: Jul 2005
Location: Burlington, On
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Firing Order
I cant seem to find any info on firing order for a 90 n/a 13b, I had some wires off yesterday and forgot to mark them, can anyone help?
#2
Jesus is the Messiah
The coils are labled and the housings are labled, and in the case you have a distributor, it is labled as well.
T1 goes to the TOP of the front rotor, and T2 goes to the TOP of the rear rotor.
L1 goes to the BOTTOM of the front rotor, and L2 goes to the BOTTOM of the rear rotor.
If you have a CAS instead of a distributor, you can get L1 and L2 mixed up, because they both fire at the same time :p You can also drive without T1 and T2 firing at all. :-p
T1 goes to the TOP of the front rotor, and T2 goes to the TOP of the rear rotor.
L1 goes to the BOTTOM of the front rotor, and L2 goes to the BOTTOM of the rear rotor.
If you have a CAS instead of a distributor, you can get L1 and L2 mixed up, because they both fire at the same time :p You can also drive without T1 and T2 firing at all. :-p
Thread
Thread Starter
Forum
Replies
Last Post
windom
Adaptronic Engine Mgmt - AUS
4
09-11-15 04:48 AM