FD UIM on s4 TII OMP question
#1
Full Member
Thread Starter
iTrader: (7)
Join Date: May 2006
Location: Dayton OH
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
FD UIM on s4 TII OMP question
So, obviously there is nowhere to connect the omp rod on the fd throttle body. So i have a few questions. Does that rod control oil flow to the block only or the turbo also?
A related question is whether i can just let the rod hang and run premix since that was my plan anyways? I obviously can't let the rod hang if it also controls oil to the turbo, i know.
Also if anyone has a pics of a setup that allows that rod to be connected to the fd uim I'd like to see some.
Yes I searched first.
A related question is whether i can just let the rod hang and run premix since that was my plan anyways? I obviously can't let the rod hang if it also controls oil to the turbo, i know.
Also if anyone has a pics of a setup that allows that rod to be connected to the fd uim I'd like to see some.
Yes I searched first.
#2
rotorhead
iTrader: (3)
block off your OMP if you are running the FD TB. your turbo will be unaffected. just make sure to premix.
http://www.banzai-racing.com/products_S4_omp_bop.htm blockoff plate kit
http://www.banzai-racing.com/products_S4_omp_bop.htm blockoff plate kit