FD seats in FC?
#1
Rotary Enthusiast
Thread Starter
Join Date: Feb 2005
Location: Norway
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
FD seats in FC?
Hi!
I bought a pair of FD seats... Has someone mounted them in a FC before?
Pictures!?
Does someone know if the spacing between the seat rails is the same on the FC and FD? (cant measure, aint got the FD seats here...)
Sindre
I bought a pair of FD seats... Has someone mounted them in a FC before?
Pictures!?
Does someone know if the spacing between the seat rails is the same on the FC and FD? (cant measure, aint got the FD seats here...)
Sindre
#6
Pistons are gay
iTrader: (11)
Join Date: Dec 2006
Location: Prince George, BC
Posts: 1,973
Likes: 0
Received 0 Likes
on
0 Posts
When people only say use the search button in there replys, that means they know dick ****. If it wasn't for these people asking questions there wouldn't be a forum. So everyone deal with it or go home.
Now that was tooshay.
Now that was tooshay.
#7
Rotary Enthusiast
Thread Starter
Join Date: Feb 2005
Location: Norway
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
I partly agree with you. There are some stuff thats pretty easy to find with the search function (i hardly use it cus i know so much ).... But when i search for stuff thats not that common i end up with 10 pages of threads with people either DREAMING of doing it or just talking about a friends friend that saw someone do it on youtube!!...
Im still using this forum so its not THAT bad, though :P
If its SO easy to find someone thats actually done the this, cant you two who told me to use the search (since its _so_ easy) find a thread for me?
If this thread becomes a Search-discussion thread.. please delete it..
Sindre
Im still using this forum so its not THAT bad, though :P
If its SO easy to find someone thats actually done the this, cant you two who told me to use the search (since its _so_ easy) find a thread for me?
If this thread becomes a Search-discussion thread.. please delete it..
Sindre
Trending Topics
#8
Ban Peak
iTrader: (49)
I made custom brackets and bolted them to the FC rails.
I just got some 1/8' bar steel, cut it into pieces with a hacksaw, bent the pieces to fit, and drilled holes.
It took about 3 hours.
I'm just your average 7 owner and used no math or templates.
I hope you got the microsuede FD seats!
My old car was sold at an auction and is Southern VA somewhere now. It was blue with a primer black nose.
#9
Rotary Enthusiast
Thread Starter
Join Date: Feb 2005
Location: Norway
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
Ahh sounds like a good ide to just make some "spacing" for the seat. As for now ive noticed that the FC rails are to short and the adjustment mechanism hits the glasfiber bottom on the seat.
Im not that tall so maybe i should make some higher spacers than hacking into the glassfiber to make it fit...
Pictures of someone that has these modded rails would be great
Im not that tall so maybe i should make some higher spacers than hacking into the glassfiber to make it fit...
Pictures of someone that has these modded rails would be great
#10
Ban Peak
iTrader: (49)
Ahh sounds like a good ide to just make some "spacing" for the seat. As for now ive noticed that the FC rails are to short and the adjustment mechanism hits the glasfiber bottom on the seat.
Im not that tall so maybe i should make some higher spacers than hacking into the glassfiber to make it fit...
Pictures of someone that has these modded rails would be great
Im not that tall so maybe i should make some higher spacers than hacking into the glassfiber to make it fit...
Pictures of someone that has these modded rails would be great
I didn't hack up the FG at all.
All I did was make eight little brackets they were short and I just bent them up and back slightly so I had clearance for the bottom of the FD seat. then I bolted those to the seat, then the seat w/ the brackets to the fc rails.
The were kinda like little s's
#11
Lives on the Forum
iTrader: (13)
Then please educate him on what phrase or phrase to use to weed out all of the non related material.
If your not part of the solution, then you are part of the problem.
If you teach one person how to use the function properly then maybe next time they can educate the next person that is having an issue. Get the idea?
If your not part of the solution, then you are part of the problem.
If you teach one person how to use the function properly then maybe next time they can educate the next person that is having an issue. Get the idea?
#12
Rotary Enthusiast
Thread Starter
Join Date: Feb 2005
Location: Norway
Posts: 846
Likes: 0
Received 0 Likes
on
0 Posts
Some people just wanna throw ****.. Anyway, i got what i was looking for and the seat mounts are getting done..
Picture update will come when im finnished!
Picture update will come when im finnished!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM