FD seats in FC?
 

Hi!
I bought a pair of FD seats... Has someone mounted them in a FC before?
Pictures!?

Does someone know if the spacing between the seat rails is the same on the FC and FD? (cant measure, aint got the FD seats here...)

Sindre

s.e.a.r.c.h


search
engine
at
rx7
club
homie


and to answer your question yes...

I did search... try to search for FD SEATS and you`ll get XXXXXXXXX threads with studfdf thats useless for me ^^

you need to search more then, the search isn't broken you just don't know how to use it

Okey... Thanks for the help..

When people only say use the search button in there replys, that means they know dick shit. If it wasn't for these people asking questions there wouldn't be a forum. So everyone deal with it or go home.

Now that was tooshay.

I partly agree with you. There are some stuff thats pretty easy to find with the search function (i hardly use it cus i know so much :D).... But when i search for stuff thats not that common i end up with 10 pages of threads with people either DREAMING of doing it or just talking about a friends friend that saw someone do it on youtube!!...
Im still using this forum so its not THAT bad, though :P

If its SO easy to find someone thats actually done the this, cant you two who told me to use the search (since its _so_ easy) find a thread for me?

If this thread becomes a Search-discussion thread.. please delete it..

Sindre

I put some in my old 87. I don't have pics though. Mine sat a little bit higher than the FC seats, but it was worth it.
I made custom brackets and bolted them to the FC rails.
I just got some 1/8' bar steel, cut it into pieces with a hacksaw, bent the pieces to fit, and drilled holes.
It took about 3 hours.

I'm just your average 7 owner and used no math or templates.

I hope you got the microsuede FD seats!

My old car was sold at an auction and is Southern VA somewhere now. It was blue with a primer black nose.

Ahh sounds like a good ide to just make some "spacing" for the seat. As for now ive noticed that the FC rails are to short and the adjustment mechanism hits the glasfiber bottom on the seat.
Im not that tall so maybe i should make some higher spacers than hacking into the glassfiber to make it fit...

Pictures of someone that has these modded rails would be great :)

I wish I had some

I didn't hack up the FG at all.

All I did was make eight little brackets they were short and I just bent them up and back slightly so I had clearance for the bottom of the FD seat. then I bolted those to the seat, then the seat w/ the brackets to the fc rails.

The were kinda like little s's

Then please educate him on what phrase or phrase to use to weed out all of the non related material.

If your not part of the solution, then you are part of the problem.:)
If you teach one person how to use the function properly then maybe next time they can educate the next person that is having an issue. Get the idea?:)

Some people just wanna throw shit.. Anyway, i got what i was looking for and the seat mounts are getting done..
Picture update will come when im finnished!

Be sure to update! I would love to see the results too cuz I'm thinking of doing the same thing.

The FD seat sits a couple inches higher then the FC seat. If your tall you will need to look into other seats or custom seat rails.

THEY WILL NOT FIT UNLESS YOUR 5',7" tall or shorter!!!, i test fitted them and i did not fit comfortably in the car, i am 5', 10" tall. buy some corbeaus, bride low max or sparcos!

Lucky I am 5'4"

:) im 5'6"

haha post pix !!

:( I am 6'4" I hardly fit in the fc as it is

I had them in my FC and my head touched the roof.

We`ll see! Im making the slides this weekend since im almost done with the drifter :)

6'1 =]

perfect fit...kinda...maybe if i was 5'11....yeahhhhh 5'11 sounds nice =]