fd intake manifolds and tb
03-08-05, 09:31 PM
#1
Senior Member
Thread Starter
iTrader: (8)
Join Date: Nov 2003
Location: Green Bay
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
fd intake manifolds and tb
hey i was wondering what all parts that i need to put a fd intake manifold (upper, lower, both) and throttle body (if needed) on a series 4. thanks.
03-09-05, 09:28 AM
#2
SEARCH!!
Been covered several times. Your not going to make a s4 manifold work without a lot of extra work, you'll need a s5 lower intake and s6 upper manifold, throttle body, TPS, and TB elbow and either port match the runners and bolt holes or buy an adaptor. If your planning on doing this with a stock ecu forget it even though a couple people have done it successfuly (on a seires 5 engine) using a stock ecu will be out of tune, so any benefits from using the FD intake will be negated.
~Mike.........
Been covered several times. Your not going to make a s4 manifold work without a lot of extra work, you'll need a s5 lower intake and s6 upper manifold, throttle body, TPS, and TB elbow and either port match the runners and bolt holes or buy an adaptor. If your planning on doing this with a stock ecu forget it even though a couple people have done it successfuly (on a seires 5 engine) using a stock ecu will be out of tune, so any benefits from using the FD intake will be negated.
~Mike.........
Last edited by RacerXtreme7; 03-09-05 at 09:31 AM.
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM