FD alternator with S4 N/A wiring help?
Thread Starter
Currently Winning
Joined: May 2002
Posts: 2,438
Likes: 0
From: Birmingham, AL
FD alternator with S4 N/A wiring help?
Alright. I've discussed this via PMs and I still am not positive what to do.
The FD alternator plug has two wires coming out. One on top, one on the bottom.
My stock wiring has a black/white-stripe wire and a white/black-stripe wire. The FSM says the B/W-stripe wire is 'R' and the W/B-stripe wire is 'L' but I checked the FD FSM and it doesn't say which is which.
Which wire goes where?
Edit: Ok, I've found the diagram in the Series 6 FSM. The top wire is 'S' and the bottom wire is 'L'. Should I connect the 'L's together?
The FD alternator plug has two wires coming out. One on top, one on the bottom.
My stock wiring has a black/white-stripe wire and a white/black-stripe wire. The FSM says the B/W-stripe wire is 'R' and the W/B-stripe wire is 'L' but I checked the FD FSM and it doesn't say which is which.
Which wire goes where?
Edit: Ok, I've found the diagram in the Series 6 FSM. The top wire is 'S' and the bottom wire is 'L'. Should I connect the 'L's together?
Last edited by $150FC; Jun 3, 2004 at 12:06 AM.
Rotary Enthusiast
Joined: Oct 2002
Posts: 1,165
Likes: 0
From: California, Bay Area
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM
Gustafson91FC
Introduce yourself
1
Sep 7, 2015 06:06 AM
