fc3s shifter converted to a fd3s
10-11-05, 08:08 PM
#1
Full Member
Thread Starter
Join Date: Sep 2005
Location: CALIFORNIA
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
fc3s shifter converted to a fd3s
Hey Can Anyone Help Me Out Here....
I Need A Short Shifter But I Am Wondering If A Fd Stock Short Shifter Will Work On A Stock Fc Transmission??? If Not, Can Anyone Tell Me What Is A Good Short Shifter To Buy That I Could Afford From The Ranges Of 100-200 Dollars.....
Thank You...plz Help Me Out As Soon As Possible....
JUST AIM ME UP AT "FC TURBO 069" OR JUST SEND A EMAIL AT "PROJECT7_069@YAHOO.COM" THANK YOU
I Need A Short Shifter But I Am Wondering If A Fd Stock Short Shifter Will Work On A Stock Fc Transmission??? If Not, Can Anyone Tell Me What Is A Good Short Shifter To Buy That I Could Afford From The Ranges Of 100-200 Dollars.....
Thank You...plz Help Me Out As Soon As Possible....
JUST AIM ME UP AT "FC TURBO 069" OR JUST SEND A EMAIL AT "PROJECT7_069@YAHOO.COM" THANK YOU
Last edited by rx7project069; 10-11-05 at 08:10 PM.
10-11-05, 08:26 PM
#2
Senior Member
Join Date: Feb 2005
Location: Orlando
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
mazdatrix.com
192 or 198 cant remember
i was going to get one because my shifting was sloppy going in gear i replaced the bushings about 20 min ago and tested it felt so good. try that first. something like 13.65 for the kit.
192 or 198 cant remember
i was going to get one because my shifting was sloppy going in gear i replaced the bushings about 20 min ago and tested it felt so good. try that first. something like 13.65 for the kit.
10-11-05, 11:02 PM
#3
Do you feel lucky punk!!!
You can use the short shifter from Miata. The only think is that the know thread will be different and you will need to buy a miata ****. Also the Miata shifter is a little shorter than the RX7. You can buy an ajustable Miata shifter. I would be cost like 60% less than the short shifter for RX7. The bushings are the same for both cars.
10-11-05, 11:03 PM
#4
Senior Member
Join Date: Mar 2004
Location: Wichita KANSAS
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Or just go get a miata short throw shifter and replace the bushings for a little cheaper.
https://www.rx7club.com/showthread.p...99#post4587699
This is exactly what I'm going to do to mine once I fix some other things.
https://www.rx7club.com/showthread.p...99#post4587699
This is exactly what I'm going to do to mine once I fix some other things.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
