http://wombat.sevarg.net/RX7/RX-7_Training_Manuals/

Thanks to NZConvertible for scanning these in & sending them out.

This covers more "geeky bits" of operation, and changes from the FB to the FC. It's a good read, especially the fuel/ignition section - it covers all sorts of fun stuff, including the signal off the CAS, the operation of the dynamic chamber & the exhaust port silencers, and some other stuff.

Let me know if you have any trouble with the server. And please mirror it!

-=Russ=-

 

That is ****** cool, thank you! saving to my backup!

 

wow this is great. thank you!

 

Bump for posting the last 2 chapters (body & body electrical).

-=Russ=-

 

thanks guys! these books explain a lot of the stuff that "doesnt make sense"

also note that the usa seems to be the same as the austrailian model

 

Temporary mirror: http://irixbox.com/RX7/

 

ahh this has some interesting explanations about the differences between the s4 13b and 1st gen 12a, as well as a good description of all the features of the suspension

 

Does a Series V 89-91 training manual exist (TII & NA) ??

 

mirrored on my site as well under 'training manuals'. thanks NZ.

The MAZDA RX-7 86-88 technical page

 

Couldn't someone zip these into one file?

 

Now we just need the FC3C training manual and maybe the North American FC3S training manual instead of the EEU one that is posted.

 

So then this is not the factory service manual??? What is a training manual

 

tells you the basics (usually at a class) that covers the car.

But not how to fix anything.

 

So there WAS training manuals for all years, 1986, 87, 87.5, 88, 89, 90, 91, ??

 

no, there is a training manul when the new model is introduced. there is an fd one, for the 93's, an rx8 one, this one for the fc (there is a usa book, ive seen it), there is a 79 book, for the 79 rx7's, the 84 book for the 84-85 rx7's.

ive never seen one for the verts, or the 89's, doesnt mean they never had em, but it would be rarer than the 1200 shop manual.....

 

i'd like to see the training manuals for the other generations, that'd be interesting

 

this should be put in the faq