FC Rx7 Suspension parts
#1
FC Rx7 Suspension parts
Theres not that many company's that make front and rear suspension parts for the 2nd gen Rx7. Ive been talking to a company that made Coilovers ect, for the Toyota FRS/Subaru BRZ. The company is really good at what they do. I will post up some of there products soon. But im trying to find out what suspension parts would u like to see more of? I need inner and outer tie rods. What do u need?
#2
FC Racer
We've got a few suspension pieces in the works and ready to go, and are keen on anything new.
All aluminum front differential mount
UHMW rear/top differential mounts
Adjustable RCA links
Adjustable rear swaybar links
Delrin bushings for the rear control arms
Working on tubular front lower control arms with solid joints (big improvement to the front end)
Bumpsteer/steering linkage set
The more interest we can get in these, the quicker we can get them out if anyone is keen.
Carl
All aluminum front differential mount
UHMW rear/top differential mounts
Adjustable RCA links
Adjustable rear swaybar links
Delrin bushings for the rear control arms
Working on tubular front lower control arms with solid joints (big improvement to the front end)
Bumpsteer/steering linkage set
The more interest we can get in these, the quicker we can get them out if anyone is keen.
Carl
#4
I break Diff mounts
iTrader: (1)
There isn't much up front.
control arm, spindle,struts, and that one lca bushing thing.
MMR and AWR make control arm bushings
Ksport and Stance make Coil overs
Only thing they could look at making is control arms, angle mod spindles, or adjustable lca bushings.
I know one person is working on custom LCA's for crazy drifter angle. Not sure if it will be production though. Other drifters are extending the LCA bushing for scrub radius and angle.
control arm, spindle,struts, and that one lca bushing thing.
MMR and AWR make control arm bushings
Ksport and Stance make Coil overs
Only thing they could look at making is control arms, angle mod spindles, or adjustable lca bushings.
I know one person is working on custom LCA's for crazy drifter angle. Not sure if it will be production though. Other drifters are extending the LCA bushing for scrub radius and angle.
#6
FC Racer
I've been eyeing the rear control arms as well. If I could get the hub carrier section machined out of aluminum for a decent price I could probably do them for an affordable rate.
Our front control arms will be adjustable so you can dial in more camber without cutting up your shock towers.
Our front control arms will be adjustable so you can dial in more camber without cutting up your shock towers.
Thread
Thread Starter
Forum
Replies
Last Post
KAL797
Test Area 51
0
08-11-15 03:47 PM